That
doesn’t work for “repeater login” unless somehow I messed
that up the password that I entered at the start. Are you
sure that the PW for “repeater login” is the same?
George
login is root
password is what you set for a password.
On 04/21/2016 08:52 PM, George Burton
wrote:
I’ve loaded DIAL and I have filled out
all of the setup info on the allstarlink.org page. I got
past the initial root login where the PW is debian, now I
am stuck at the “repeater login:” prompt. I do not have a
clue what it is asking for nor do I remember entering a
repeater login PW. Can anyone point me in the right
direction?
George
K7wwa
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
--
"Anything is possible if you don't know what you are talking about."
1st Law of Logic