Ok didn’t realize the graphs in first page of allmon is a image, ill have to check out awstats.
Joe
Kd2nfc
Sent from Mail for Windows 10
From: Mike
Sent: Sunday, May 20, 2018 10:22 PM
To: app_rpt-users@lists.allstarlink.org
Subject: Re: [App_rpt-users] Initial 24hr load test of ASL VPS 1mb/1core
Which stats ?
the graphic on the allmon page was snapshot from the vultr dashboard (as
I described).
The other in the menu is awstats (open-source), is used for normal web
traffic tracking but is suppose to have some advance functions I will
try soon for stat'ing stream data (if it will do what I think) . For
this type of install I will be using awstats to help with diagnostics to
determine where unintentional server load/hacks come from. Perhaps
advise the group for security on these VPS installs? But I just
deployed what others wrote. But awstats has always been a pain to deploy
the same way twice.... Adjustments need to be made for every version of
every OS. Hard to get it 100%. So there is a how2 if you wish to dabble.
...mike/kb8jnm
On 5/20/2018 7:36 PM, KD2NFC, Joe Puma wrote:
> Hey man those web stats are the bomb. You made that yourself?
>
> Joe
> KD2NFC
>
> Sent from my iPad
>
>> On May 20, 2018, at 2:44 PM, Mike <mm@midnighteng.com> wrote:
>>
>> For those that have a interest.
>>
>> This is a 1core 1gb ram instance. The stats were generated from vultr's dashboard for the instance.
>>
>> There have been 4 output streams on this over the 24hr test period. With the W3WAN sys generating the traffic.
>>
>> http://29999.link/allmon/link.php?nodes=29999
>>
>> From what I have seen, that is a typical node load.
>>
>> I think it looks pretty positive. But Would like to hear your read on it 'ON list' so everyone benefits.
>>
>> I will not be revising this on the page, but deleting the graph after a week or 2.
>>
>> I deployed awstats (i use on general webs) and later will be testing it's ability to monitor/stat stream data.
>>
>> (how2 is forthcoming)
>>
>> But if anyone has done this already with stream data, let me know. Fill me in !
>>
>> For future reference, the testing and test interface's I build and any howto's will be posted at http://29993.link
>>
>> A test/toy hub. Nothing fancy, just the skinny. I intend to use good stuff I test at 29993 at other deployments.
>>
>> Anyone is welcome to use, copy, distribute any tools/toys for in the future so bookmark it and check-in from time to time to see if there is anything of value or what's up, or just connect to 29993 for a chat. But it would be suggested to look at the allmon page for activity before using any "LIVE" tools/toys i post later. I have a lot of stuff in mind, many of them old stuff I created years ago so we shall see how ASL on DEB9 works with some of them on a web instance. So far, I'm lik'n it !
>>
>> And 29993 is a 512mb 1core instance.
>>
>> I will post a graph for it as the same when I have a good 4-out stream output data for 24hrs to use.
>>
>> I guess the whole trick is to find out what can be done on the minimal/512mb instance.
>>
>> So, I would like to sched anyone to connect to the 29993 minimal instance
>>
>> 9pm esdst Monday may 21 / i think that is @ 01:00 utc for anytime within that hour.
>>
>> so I might have a looksy at the real time load problems on the amount of streams we end up with.
>>
>> Thanks for your help with that, if you will connect up with a free node you have then.
>>
>> I'll shoot the group what I find out. Perhaps we will crash it ?
>>
>> 73,
>>
>> ...mike/kb8jnm
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users@lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users@lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.