I have a thru hole version of the voter board and
have a few questions:
1. Should the yellow host LED be flashing or on
solid? Mine is flashing
2. Should the red transmitter LED be flashing or on
solid when transmitting? Mine is flashing at the same rate as the yellow
host LED.
3. When I telnet into the RTCM I get the
following scrolling over and over. I don't have master in the voter.conf
file so I don't understand why it keep saying "ERROR! Host not acknowledging
non-GPS disciplined operation"
<System Time
Not Set> Host Connection
established (Pri) (192.168.1.195)
<System Time
Not Set> ERROR! Host not
acknowledging non-GPS disciplined operation
<System Time
Not Set> Host Connection Lost
(Pri) (192.168.1.195)
<System Time
Not Set> Host Connection
established (Pri) (192.168.1.195)
<System Time
Not Set> ERROR! Host not
acknowledging non-GPS disciplined operation
<System Time
Not Set> Host Connection Lost
(Pri) (192.168.1.195)
<System Time
Not Set> Host Connection
established (Pri) (192.168.1.195)
<System Time
Not Set> ERROR! Host not
acknowledging non-GPS disciplined operation
Here is
my voter.conf file
[general]
port=667
buflen=500
password=ima516
[27761]
client1=radios,transmit
I have the rpt.conf change from: rxchannel=Radio/usb27761 to: rxchannel=voter/27761
Any ideas?
Thanks, Steve_WB8GRS
_______________________________________________