Everything did work just fine with the echolink connection until just recently so I could have inadvertently caused a typo that I can't find ( i have looked for a day) or it could be a corruption but...

When I connect to a echonode for "Receive Only", it opens for "full transceive" and I get that ping-pong effect.

So,
Anyone point me in the right direction on this if you have experience with it ?

...mike/kb8jnm


-------- Original Message --------
Subject: [App_rpt-users] MK808... anyone looking at this?
From: "n6gkj.cm98@yahoo.com" <n6gkj.cm98@yahoo.com>
Date: Mon, February 24, 2014 2:50 pm
To: App RPT Users <app_rpt-users@ohnosec.org>

Hey guys,
Been playing with the MK808, 1.6 ghz dual core ARM9 processor, 1 GB ram, 2 USB2 ports, built-in WiFi. Small size, 3"x1.125"x.5". Comes stock with Android 4.1.
I just installed PICUNTU Linux into one this weekend. There is enough CPU power to generate DATV MPEG2 transport streams captured from an external MPEG2 ENCODER. Makes me think it might be fast enough to encode our USB FOBS.
Anyone playing with these great little computers?
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.