Thanks Steve! I'll look into that as well.
 
Steven Donegan
KK6IVC General Class FCC License
Silver State Car #86
www.sscc.us

From: Steve Zingman <szingman@msgstor.com>
To: Steven Donegan <donegan@donegan.org>; "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org>
Cc: "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org>
Sent: Tuesday, October 6, 2015 6:06 AM
Subject: Audio detection circuit to generate 'COR'

Steve COR or actually RUS "Receiver Un Squelch" is available in that radio. You have to unsolder the shield to get to it.

73, Steve



On 10/6/2015 8:56 AM, Steven Donegan wrote:
Well, it is a generic question - any radio without COR. The specific model in my case is a UHF radio module model # SA-828U: http://www.alibaba.com/product-detail/1W-5km-distance-SA828-U-uhf_60092524887.html?spm=a2700.7724857.29.62.Xbg6c5
 
Steven Donegan
KK6IVC General Class FCC License
Silver State Car #86
www.sscc.us

From: Skyler Fennell <electricity440@gmail.com>
To: Steven Donegan <donegan@donegan.org>
Cc: app_rpt-users@ohnosec.org
Sent: Tuesday, October 6, 2015 5:47 AM
Subject: Re: [App_rpt-users] Audio detection circuit to generate 'COR'


That might work, I use it for packet.

What radio are you on?

Sent from my iPhone



On Oct 6, 2015, at 6:29 AM, Steven Donegan <donegan@donegan.org> wrote:

Does anyone have a circuit that will take audio from a radio and generate a pseudo COR signal for the URI-x? If so would you share the circuit diagram?

TIA
 
Steven Donegan
KK6IVC General Class FCC License
Silver State Car #86
www.sscc.us
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 




_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.