Thanks for the info, so there is no way to more permanently bond them together, I setup the 1001 node as a monitor for the system... Seems like there should be a software method for that?

Thanks,

Mark KC7DMF

"Got Root?"

How many software engineers does it take to change a light bulb?
None. It's a hardware problem.


Unix is user friendly. It's just very particular about who it's friends are.
WINDOWS: Will Install Needless Data On Whole System
MICROSOFT: Most Intelligent Customers Realize Our Software Only Fools Teenagers.


A ntennas
P oorly
P laced
L acks
E ngineering

The best way to accelerate a computer running Windows is at 9.81 m/sē.

"I get paid to support Windows, I use Linux to get work done."



On Thu, Oct 3, 2013 at 3:52 PM, Tim Sawyer <tim.sawyer@me.com> wrote:
A permanent link is one that automatically reconnects if the IP network fails or if the far end node goes away and returns. ilink,6 is supposed to disconnect all links including permanent links.

On monitor; the status from one end should say monitor, but it may not be the end you are expecting. Try both sides.
--
Tim
:wq

On Oct 3, 2013, at 2:49 PM, Mark Johnston <markjohnston73@gmail.com> wrote:

> Does anyone know what is up with the permalink command
>
> I have it setup as this:
>
> 76=ilink,12                           ; Permanently connect specified link -- monitor only
> 77=ilink,13                           ; Permanently connect specified link -- transceive
>
> When I do *7628344 from my private node 1001 it connects but will not stay when I disconnect all   aka *71... also when I do a status on 28344 it says transceive... not the monitor only.
>
> Is there a diff iLink i should use to disconnect all 'non-permalink' links?
>
> 71=ilink,6
>
>
> Thanks...
>
>
>          Mark KC7DMF
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users@ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users