When in "Remote Base" mode, the node is essentially dead, will not respond or do any commands unless another node is connected to it. Maybe that is why you are having issues?
MontyOn Fri, Sep 30, 2016 at 8:19 AM, Skyler F <electricity440@gmail.com> wrote:Thank you Monty, first, I meant rptena (my version says txena) but I haven't been able to fix that issue, but isn't a really big deal.If I can run shell scrips from a remote base node, I'm all for using that functionality. I haven't been able to get cmd to work from it, however.Remote VHF - 42622Remote UHF - 40764
On Thursday, September 29, 2016, Monty <monty@ke7jvx.com> wrote:Hi Skyler,Not sure if you ever got a solution for this issue. I was thinking along the lines Corey was. If you set this node up as a traditional "Dumb" remote base, then when you go into Command Mode (*4) of that node, the remote base will not transmit. That way you don't have to use the part of your script the enables and disables your transmitter. Here's a overview of how to make it a traditional remote base:rpt.conf:[1234] rxchannel = SimpleUSB/usb ; Set for your receive channel / device remote=y ; Set as "Dumb" node, as your script will handle the channel changes functions=functions-remote ; Wherever your functions live phone_functions=functions-remote ; Wherever your functions live [nodes] 1234 = radio@127.0.0.1/1234,NONE,y ; Remote base node
MontyOn Tue, May 3, 2016 at 4:55 PM, Skyler F <electricity440@gmail.com> wrote:Then I won't be able to hear the telemetry with the node that has just connected to the remote baseOn Tue, May 3, 2016 at 5:54 PM, Tim Sawyer <tisawyer@gmail.com> wrote:What about using the localplay command rather than the playback command?--On Mon, May 2, 2016 at 2:06 PM, Skyler F <electricity440@gmail.com> wrote:When I do a playback from another LOCAL node, (sharing the same rpt.conf), the remote base will play the audio file over it's transmitter. I was able to solve this problem by disabling the transmitter for the duration of the script so that it does not play any of the telemetry when switching channels.Modifying app_rpt.c to replace "RPTENA" with "" and then recompiling asterisk did solve the issue so it won't announce anything when I re activate the transmitter.
73Skyler KDØWHBOn Mon, May 2, 2016 at 9:42 AM, Tim Sawyer <tisawyer@gmail.com> wrote:Are you sure you need to disable the TX? I'm pretty sure none of the telemetry comes out of the remote side.On Sun, May 1, 2016 at 4:53 PM, Skyler F <electricity440@gmail.com> wrote:______________________________Is it possible to disable the T X E N A announcement when re enabling the transmitter? I have a script which disables the transmitter and re-enables every time that I switch channels on my remote base. It is sort of annoying that it goes throughout all links that have telemetry enabled.Skyler
73_________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.----Tim
----Tim--
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.