From http://ohnosec.org/drupal/node/56

Denying incoming connections from selected Echolink nodes

Echolink connections may be denied on a per-callsign basis. This is done by using the deny and permit key values in the above [el0] stanza. The default is to allow all connections if the permit and deny keywords are not present. If a permit is specified, then only the callsigns specified in the permit statement will be allowed to connect. If deny is specified, then the callsign(s) specified will be denied access and the connection will be terminated. Commas are used to delimit multiple callsigns for permit and deny keys. Wildcards are supported so that whole classes of connections can be rejected. Examples:

To deny w6xxx you would add the statement: deny=w6xxx
To prohibit computer-based connections you would write: permit=*-*
To allow access to only a select group of callsigns: permit=w6abc,w6def,...

On 3/19/2011 15:32, Tony KT9AC wrote:

Does anyone have a simple way to create an access list for chan_echolink? I get a lot of quick connect/disconnects and want to block the random drifters.

Thanks,
Tony
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users