If you have a sip phone or Application, you can connect to the node with a phone to command it, and connect to other nodes just like a radio - except it can use vox or dtmf to key the xmtr depending on how it is configured.

example using vox:
extensions.conf:


[radio-control]

exten=1001,1,Answer

exten=1001,n,Playback,rpt/node

exten=1001,n,Rpt,1001|Pv




If you want to access it from outside your home network, need to have port 5060 forwarded to your allstar box - unless you change that in sip.conf... then fwd to whatever other port is used, one big downside to opening sip, is there tend to be a lot of 'people' from other countries who try to hack/use your sip to place calls etc... so one has to be careful with opening that service to the world, iax is not as common... it is a bit safer to have 4569 open for iax - I only use the SIP internally so I don't have that issue, and use iax for other devices - 

Hope that helps... 

"Got Root?"

How many software engineers does it take to change a light bulb?
None. It's a hardware problem.


Unix is user friendly. It's just very particular about who it's friends are.
WINDOWS: Will Install Needless Data On Whole System
MICROSOFT: Most Intelligent Customers Realize Our Software Only Fools Teenagers.


A ntennas
P oorly
P laced
L acks
E ngineering

The best way to accelerate a computer running Windows is at 9.81 m/s².

"I get paid to support Windows, I use Linux to get work done."


On Fri, Jun 3, 2016 at 8:47 PM, kk6ecm <kk6ecm@gmail.com> wrote:
Mark, could you say a bit about how it is used?

Thanks,
Bob
k6ecm
73

Sent from iPad


On Jun 3, 2016, at 8:35 PM, Mark Johnston <markjohnston73@gmail.com> wrote:

I use this in my sip.conf for the Polycom phone that I have here.



[polycom]

type=friend

context=radio-control

secret=yoursupersecretPW

host=dynamic

dtmfmode=rfc2833               

username=polycom               

disallow=all

allow=ulaw                     

progressinband=yes         

transfer=no


_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.