Shouldnt be much different than normal.

here is screen shot of my node:

login as: root
root@--.--.--.--'s password:

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
root@AST_27286_MBR:~# asterisk -r
Asterisk 1521, Copyright (C) 1999 - 2008 Digium, Inc. and others.
Created by Mark Spencer <markster@digium.com>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it under
certain conditions. Type 'core show license' for details.
=========================================================================
Connected to Asterisk 1521 currently running on AST_27286_MBR (pid = 266)
Verbosity is at least 3
AST_27286_MBR*CLI> rpt fun 27286 *70
    -- <DAHDI/pseudo-76729349> Playing 'rpt/nodenames/27286' (language 'en')
    -- <DAHDI/pseudo-76729349> Playing 'rpt/repeat_only' (language 'en')
    -- Hungup 'DAHDI/pseudo-76729349'
    -- Hungup 'DAHDI/pseudo-1591220470'
AST_27286_MBR*CLI>

I reloaded exiting config files from  previously built node.

However I think the new RPI dial default configs have slightly different codes. the main ones lik e *3 and *1 should work though.

Jon VA3RQ


On 10/25/2015 12:39 PM, Russ WL7LP wrote:
I have downloaded the Rasp-Pi 2 img. it installed 4 times just fine.
however, I can not connect it to anything there seems to be nothing
in asterisk -R  once in the CLI prompt doing a ? mark products nothing
no menu at all. has something changed to connect a node from the
CLI command prompt?
 
73 Russ WL7LP
Alaska Morning Net - Net Manager
IRLP node 7369


_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.