Hello Rodger.  I had the same problem with the WX and had to poke around all files in supermon until I resolved the problem.

All you have to do is edit the global.inc file.  The last lines say:

// Show weather conditions and temperature for Zip code area
$LOCALZIP = "SKMD";

Mine is SKMD, which corresponds to my nearest airpot.  Find the airport abreviation for your nearest one, save the file and restart from the browser.  You should now have the correct WX info.

73 de Guillermo - HK4KM





Message: 1
Date: Wed, 06 Mar 2019 11:42:15 +1300
From: Rodger Hanson <rodger_hanson@slingshot.co.nz>
Subject: [App_rpt-users] Supermon Weather Settings
Content-Type: text/plain; charset=US-ASCII; format=flowed

Hello All
I have my AllStar up and running, setup supermon, and found that the
weather settings seem to be limited to USA, which perhaps is a bit short
sighted since there are people all over using Allstar & supermon.

Is there a way to put in my weather "zip code" for Auckland, New
Zealand?

I just could find any document about setting up outside the USA.
Any help with this would be appreciated.

Otherwise, the Allstar from Hamvoip works well, after sorting out my
power problem.
Thanks guys for the great work.

--
Kind Regards,
Rodger Hanson
Tel: +64 9 278-8683
Mob: +64 27 5687659

_Please consider the environment before printing this email_


------------------------------

Message: 2
Date: Wed, 6 Mar 2019 00:58:02 +0000
From: Jim Nessen <nessenj@jimsoffice.org>
To: Users of Asterisk app_rpt <app_rpt-users@lists.allstarlink.org>
Subject: Re: [App_rpt-users] Supermon Weather Settings
Message-ID:
   
Content-Type: text/plain; charset="us-ascii"

Your question is probably better suited for the official hamvoip mailing list


Jim, K6JWN

-----Original Message-----
From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Rodger Hanson
Sent: Tuesday, March 5, 2019 2:42 PM
Subject: [App_rpt-users] Supermon Weather Settings

Hello All
I have my AllStar up and running, setup supermon, and found that the weather settings seem to be limited to USA, which perhaps is a bit short sighted since there are people all over using Allstar & supermon.

Is there a way to put in my weather "zip code" for Auckland, New Zealand?

I just could find any document about setting up outside the USA.
Any help with this would be appreciated.

Otherwise, the Allstar from Hamvoip works well, after sorting out my power problem.
Thanks guys for the great work.

--
Kind Regards,
Rodger Hanson
Tel: +64 9 278-8683
Mob: +64 27 5687659

_Please consider the environment before printing this email_ _______________________________________________
App_rpt-users mailing list

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.


------------------------------

Message: 3
Date: Wed, 6 Mar 2019 00:32:57 -0600
From: "David Wilcox" <wilcoxdl@charter.net>
Subject: [App_rpt-users] Link Question
Message-ID: <000001d4d3e6$707d5db0$51781910$@charter.net>
Content-Type: text/plain; charset="us-ascii"

Help Please

I'm using a handset radio to control a remote repeater the problem I'm
having is when the handset releases it hears the output from the repeater
and goes in to

Transmit release and transmit cycle that won't stop, is there a setting in
the rpt.conf that would cure this

Thanks for any help

Dave

Kd9bvf

-------------- next part --------------
An HTML attachment was scrubbed...

------------------------------

Message: 4
Date: Wed, 6 Mar 2019 01:21:41 -0600
From: George Csahanin <george@dyb.com>
Subject: [App_rpt-users] figured out part of my problem compiling
    asterisk
Content-Type: text/plain; charset=utf-8; format=flowed

The only sources I found turn out to be Limey Linux distro.

Looking on github.com/allstarlink and I just don't see any other. Can
anyone point me at the sources?

I need to ftp it or wget it into /usr/src so I can compile.

GeorgeC W2DB

2360, 28599 and more...



---
This email has been checked for viruses by AVG.



------------------------------

Subject: Digest Footer

_______________________________________________
App_rpt-users mailing list


------------------------------

End of App_rpt-users Digest, Vol 121, Issue 5
*********************************************