Sure it's possible.  Can't remember if it inclues the raspi-config tool, but if not, you can run fdisk, change the partition size to use the entire sd card, reboot, then run resize2fs.  However, this isn't always advised, as leaving some unpartitioned space will help the longevity of a SD card.

Jeremy, NQ0M

-----Original Message-----
From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Bob
Sent: Sunday, September 3, 2017 9:17 PM
To: 'Users of Asterisk app_rpt' <app_rpt-users@lists.allstarlink.org>
Subject: [App_rpt-users] RPi Memory Usage

Is it possible to use the entire MicroSD memory space in the RPi load? It appears I'm only using about 6 GB of 32GB, and I'm not finding fs_resize.

Thanks,
Bob

_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.