Bob,

I got the "Died or something" error before in the past. I laughed for
days after I saw that, programmers got jokes!

The issue with mine was the USB hardware in the computer was failing. I
have no idea what, but something was. It "Died or something!"

Not really sure what that error really meant, I took the DOM (flash
memory module with 40 pin header instead of USB, I was using a neoware
thin client computer with Limey Linux) and put the DOM in another
machine, attached the URi and all was well.

Gotta love cryptic errors!

~Benjamin, KB9LFZ


On Sun, 2017-11-12 at 14:24 -0800, Bob wrote:

I periodically experience the following error on the RPi3 with DIAL

(/var/log/asterisk/messages). Any clues? The repeater uses a URIx,

and the

Linux address for the USB is the same as devstr= in

usbradio_tune_usb.conf

ERROR[537] chan_usbradio.c: HID process has died or something!!

[Nov 12 13:17:07] NOTICE[538] chan_usbradio.c: Assigned USB device 1-

1.2:1.0

to usbradio channel usb

[Nov 12 13:17:07] WARNING[538] chan_usbradio.c: Loaded parameters

from

usbradio_tune_usb.conf for device usb .

[Nov 12 13:17:07] WARNING[537] chan_usbradio.c: Possibly stuck USB

read

channel. [usb]

[Nov 12 13:17:07] WARNING[537] chan_usbradio.c: Nope, USB read

channel [usb]

wasn't stuck after all.

[Nov 12 13:38:16] ERROR[537] chan_usbradio.c: HID process has died or

something!!

[Nov 12 13:38:16] WARNING[520] app_rpt.c: rpt_thread restarted on

node <#

redacted>

The 21 min delay from the prior message is typical. After the error,

it

restarts asterisk, and the startup macro reconnects the repeater.

Thanks,

Bob

k6ecm

_______________________________________________

App_rpt-users mailing list

App_rpt-users@lists.allstarlink.org

http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.o

rg/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the

bottom of the page. Enter your email address and press the

"Unsubscribe or edit options button"

You do not need a password to unsubscribe, you can do it via email

confirmation. If you have trouble unsubscribing, please send a

message to the list detailing the problem. 

_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.