Cory

I think there is a setting for this

propagate_dtmf= see http://209.159.155.200/drupal/node/134

but, for controlling remote asterisk nodes from another asterisk node, you are supposed to use this:

see http://209.159.155.200/drupal/node/21

*4node Enter command mode on a remote node

*4node Enter command mode on a remote node

*4node Enter command mode on a remote node

Command mode means send all received DTMF digits to the node number specified (bypassing the local command decoder).

Send # to exit command mode, and restore local command decoding.

I have had mixed results with it

GL

Ken

KE2N

-----Original Message-----
From: Corey Dean N3FE <n3fe@repeater.net>
To: Jim Duuuude <telesistant@hotmail.com>; app_rpt mailing list <app_rpt-users@ohnosec.org>
Sent: Sat, Jan 22, 2011 9:09 am
Subject: [App_rpt-users] DTMF Allow

Is it possible to get a feature added the will allow DTMF to pass through? I know you can regenerate using the cops but it would be nice to be able to press a sequence and then anything that followed would not mute the touch tones.

This would help if asterisk was used as a hub and the other repeaters linking in were using standard controllers. That way one repeater on one end could control one on the other end.

Just a thought... I know as of recent this would have been very helpful!!!

Corey N3FE

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users