I have been waiting a bit before I start
playing with DIAL on a RPI2.
I still have two questions
1. Does the RPI2 DIAL version solve the
tx echo buffer issue that the current version of Asterisk RPI2
code has. The fix to this issue seems to be taking a long
time.
2. Some users have reorted that a lot of
modules have been disabled, such as the Echolink channel
driver and others.
3. With the new Mini-DV4 dongle $125
and the amount of capability, has anybody wrote a channel
driver to tie the Yaesu Fusion Wires-X network into DIAL. It
appears that most of the documentation is out there, we just
need someone to write the channel driver
Thanks
73 Neil Sablatzky K8IT
Allstar Node 41838 KITLINK
Allstar Node 42087 KITLINK HUB
IRLP Node exp0068
Echolink K8IT-L
WIRES-X K8IT 11479 Room 21479
Sent: Tuesday, October 27, 2015 10:35 AM
Subject: Re: [App_rpt-users] Procedure for loading
DIAL on a R-Pi2 or a PC
Mac,
The RPi2 install is pretty much download the image, burn it to SD
card,.
Once the Pi boots, you can login on the HDMI / USB console, or SSH
into the board on port 222.
The board is setup for DHCP so check your DHCP (router) server for
address.
If you want, you can login via the built in serial port at 115,200
System will walk you through setup.
FAQ for DIAL is at:
<http://docs.allstarlink.org/drupal/node/170>
73, Steve N4IRS
On 10/27/2015 10:20 AM, N7MTC .
wrote:
Is there a
procedure for loading the "new" DIAL version of asterisk for
Raspberry pi2?
I am
looking to connect either a Pi2 or an intel NUC to a Yaesu
Dr-1x using the Arcom RC-210 and the Arcom ADR. I noticed DIAL has replaced ACID as the
latest flavor of asterisk for both PC and PI2. I have not found any
install write-ups or YouTubes showing a DIAL install.
Regardless
of which platform I will need to use an USB to Serial
adapter to connect the ALLSTAR node to the repeater
controller. It will
be of the FTDI chipset either a trendnet Tu-s9 or a GearMo
USB RS-232.
/73
Mac, N7MTC
Benjamin
Franklin - "Those who surrender freedom for security will
not have, nor do they deserve, either one."
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and
scroll down to the bottom of the page. Enter your email address
and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email
confirmation. If you have trouble unsubscribing, please send a
message to the list detailing the problem.
No virus found in
this message.
Checked by AVG - www.avg.com
Version: 2015.0.6173 / Virus Database: 4455/10900 - Release
Date: 10/27/15
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.