Sorry , I did not notice at first these were both virtual but is all the same except for that router.

But I wanted to add a few checks...

allow manager port through your firewall ?

set bind address  to this until you have it working

bindaddr = 0.0.0.0

Some other...

enabled = yes                                                                  
webenabled = yes                                                              
port = 5038 

If all else fails, move the file (copy) it to the one that does not and check own/permissions and test.

Should tell you something.

Perhaps it is a type error in your ini.php - ip/pass/port

One of those itchy things that drives ya nuts ! LOL

...mike/kb8jnm

I'm probably missing something simple.

I'm trying to just use one dashboard to monitor/control multiple nodes.

Example:

Main Allmon2: http://173.199.114.204/allmon2/link.php?nodes=41605,41604

Secondary node: http://45.77.204.214/allmon2/link.php?nodes=41604

The nodes are on 2 different virtual servers.

the secondary node's allmon can connect to the asterisk manager but the Main Allmon2 can't connect to the asterisk manger.

Thoughts?

73,

Russell Thomas, KV4S

_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.