Hi guys... I've got a SimpleUSB full duplex system connected to a port on my controller (Arcom RC210) and I've noticed something weird with telemetry announcements, specifically connect/disconnect messages, and I've tried with both a URI and URI-X with the same results.

I suspect the audio may be clipping in the controller, even though the levels appear to be adjusted correctly for 3Khz deviation @ 1Khz modulation in and out, so I want to make sure the URI(s) are not the problem. 

I see you can build a loopback connector (docs.allstarlink.org/drupal/node/143), but what's the best way to test this? Is there a way to inject/monitor audio? I'd like to see if I can reproduce the choppy audio so I can eliminate this being something in my system and/or URI(s). 

tnx

Stephen

K1LNX

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 

-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic