Are you using the alternate IP in the RTCM? Check the RTCM status (98) make 100% sure the voters are logged into the appropriate server. 

(Going off of memory) in asterisk CLI you can do a voter display [channel name] and itll show you all the connected RTCM's and the current RSSI. Make sure that matches what you expect. 

Voted receiver C on mountain 1, which server is it logged into, mountain 1's or mountain 2's?

Kinda need to see RTCM configs, voter.conf and rpt.conf

Cheers,
Jesse

On Feb 2, 2017, at 5:08 PM, Allstar Admin <allstarlinks@gmail.com> wrote:

You setup is difficult to envision, being the visual sort of guy that I am. I'd have to see a drawing to understand the picture. :-)

But maybe this will help. RTCMs, or more correctly stated, chan_voter is picky about site names and passwords. You have to be sure no site names or passwords are duplicated. Also, you must not have a password that the is the same as any site name including it's own site. Otherwise chan_voter gets very confused. Give you voter.conf a good going over and let us know how you make out. 


On Thu, Feb 2, 2017 at 1:38 PM, James Cizek <james.m.cizek@gmail.com> wrote:
Hi folks,

I have a unique problem I am hoping someone on the list can help me uncover where to look next.  The situation is 
this:

I have repeaters are 2 mountain tops.  Mountain 1 and Mountain 2.  On Mountain 1 are (2) repeaters, a VHF (repeater A) and 
UHF (Repeater B).   On Mountain 2 is a VHF (Repeater C) and UHF (Repeater D).   

On mountain 1, there are also voted receivers for Repeaters C & D.  

There are DIAL boxes on both mountains.  Repeaters A&B using DIAL on Mountain 1 (non-voting config, just basic repeater), and Repeaters C,D and both voters using
DIAL box on Mountain 2 (microwave links between mountain 1 & 2).

Everything has it's own RTCM (so there are 6 RTCMs in this situation). Everything is private (no public allstar nodes)

Looking at allmon2 (running on each of the DIAL servers) I can see that there are NO links established and the RSSI bars 
respond to each of the voted receivers appropriately.  

I have checked each RTCM and DIAL box and verified that everything is logging in to where it is supposed to, and no where else.

The problem I have is that when you transmit on Repeater A, the audio is being transmitted on both Repeaters A & C.
If you transmit on repeater C, the audio is only retransmitted on Repeater C (as it should be).

Looking at allmon, even during a transmission, there are NO links established.

Verbose output on asterisk (asterisk -rvvvvvvvvv) shows no links established on either DIAL box. 

I can't figure out why DIAL on mountain 1 is sending the audio over to Mountain 2 DIAL (and only on the VHF set of repeaters even though the UHF set has an identical config).  
Any thoughts on where I might go looking would be much appreciated... I have been tearing my hair out on this one for a while!

Happy to share any requested config.  
Thanks in advance for any thoughts/comments/insights/etc!

james
KI0KN

_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.