Are you saying that when you connect to one of your nodes on your LAN you have one-way audio?<br><br>If so you need to edit your rpt.conf on both nodes.<br><br>Node that uses port 4569<br>[nodes]                                                                         <br>
; Note, if you are using automatic update for allstar link nodes,               <br>; no allstar link nodes should be defined here. Only place a definition         <br>; for your locak nodes, and private (off of allstar link) nodes here.           <br>
                                                                                <br>2063 = <a href="http://radio@127.0.0.1:4569/2063,NONE">radio@127.0.0.1:4569/2063,NONE</a>   ; This must be changed to your node numb<br>2064 = radio@192.168.XXX.ZZZ:4568/2064,NONE,y <br>
<br>Node that uses port 4568<br>
[nodes]                                                                         <br>
; Note, if you are using automatic update for allstar link nodes,               <br>
; no allstar link nodes should be defined here. Only place a definition         <br>
; for your local nodes, and private (off of allstar link) nodes here.           <br>
                                                                                <br>
2063 = <a href="http://radio@127.0.0.1:4568/2063,NONE">radio@127.0.0.1:4568/2063,NONE</a>   ; This must be changed to your node numb<br>
2064 = radio@192.168.XXX.ZZZ:4569/2064,NONE,y <br><br>If you only use rpt_extnode for find your other node, then it use the public address. This makes your node route to the outside of your router then back in. If you edit [node] in rpt.conf you can tell your node where to the other node is on your LAN and not route to the outside world and back in.<br>
<br>David<br><br><div class="gmail_quote">On Tue, Dec 21, 2010 at 2:33 PM, Ken <span dir="ltr">&lt;<a href="mailto:ke2n@cs.com">ke2n@cs.com</a>&gt;</span> wrote:<br><blockquote class="gmail_quote" style="margin: 0pt 0pt 0pt 0.8ex; border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;">
<div link="blue" vlink="purple" lang="EN-US"><div><p class="MsoNormal">I have two nodes, behind a common router,  that are quite similar, except that - on the internet side one appears as port 4569 - and the other as port 4568.  </p>
<p class="MsoNormal"> </p><p class="MsoNormal">For the longest time, I have found that I can connect only in one direction. In the other direction I get the  “chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response” failure message.</p>
<p class="MsoNormal"> </p><p class="MsoNormal">As it happens, the one I can do the connecting connect with is the one that uses the 4569 port.</p><p class="MsoNormal"> </p><p class="MsoNormal">I would expect that I can connect in either direction. What can cause this one-way problem?</p>
<p class="MsoNormal"> </p><font color="#888888"><p class="MsoNormal">Ken</p></font></div></div><br>_______________________________________________<br>
App_rpt-users mailing list<br>
<a href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a><br>
<a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
<br></blockquote></div><br>