This article does not tell the whole story on propagate DTMF.

The statement::
propagate_dtmf=yes

Must be in the node stanza of the node you want to generate DTMF.
But the actual command prefix is not mentioned in the article.
So if you have this set up in your node and then at the cli you send :

rpt fun (node) X40(DTMF sequence)

The *40 is the command prefix needed to be sent before and DTMF tones.
I thought for years that this didn't work until Tim K4KWQ pointed out the command prefix.
Its the missing piece of the puzzle

With this I can command a hardware controller via the Allstar node connected to it.

Jon VA3RQ


On 2/19/2014 10:55 PM, Chris Andrist wrote:
Here is the documentation on it. http://ohnosec.org/drupal/node/134

--
Regards,

Chris Andrist, KC7WSU

On Feb 19, 2014, at 8:53 PM, "David Powell-Williams" <dpowellwilliams@shaw.ca> wrote:

Perhaps 'propagate_dtmf=yes' (!= propogate)

73,
David
VE7MQ


---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 


_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.