Thanks what got me was 18 not being at 0. I entered 111 and it gives Elkes (11730) : 0, Glasers (1103) : 65535, Sawyer (1170) : 255 but can’t change any of that. Next line says Press The Any Key (Enter) To Continue
From: Jim Duuuude [mailto:telesistant@hotmail.com]
Sent: Friday, August 16, 2013 9:06 PM
To: Bill Hurlock; app_rpt mailing list
Subject: RE: [App_rpt-users] App_rpt-users Digest, Vol 54, Issue 26
There are some "custom" settings (that *REALLY* don't apply to more then 1 or 2 users)
that are "hidden" parameters. Use the "111" selection on the main menu to view all of them.
If any are non-zero set it (the indicated one, by its number/menu selection) to 0.
Also, check non-hidden, new menu items for non-zero values (particularly the "18" from
the main menu).
I just loaded (will be available after 6:15 PDT) a new version of firmware that should make the
"upgrade process" a little less poopy.
Jim
> From: bill.hurlock@cpcomms.com
> To: app_rpt-users@ohnosec.org
> Date: Sat, 17 Aug 2013 00:33:37 +0000
> Subject: Re: [App_rpt-users] App_rpt-users Digest, Vol 54, Issue 26
>
> Hi Tim,
> I tried doing an update to your lastest RTCM firmware. One of my RTCM's took the load OK and is working great. One of my voter RTCM's accepts the load OK but as soon as I key up on channel it starts switching the voter radio in and out of TX. TX lite flashs off and on on the front of the RTCM and the RX lite blinks occasionally. I looked at the RTCM on the good one verses the bad one and the setup looks OK. I reloaded the old Voter-SMT.cry and all is well. Any idea's?
>
> Bill Hurlock
>
> -----Original Message-----
> From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of app_rpt-users-request@ohnosec.org
> Sent: Sunday, August 11, 2013 12:00 PM
> To: app_rpt-users@ohnosec.org
> Subject: App_rpt-users Digest, Vol 54, Issue 26
>
> Send App_rpt-users mailing list submissions to
> app_rpt-users@ohnosec.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> or, via email, send a message with subject or body 'help' to
> app_rpt-users-request@ohnosec.org
>
> You can reach the person managing the list at
> app_rpt-users-owner@ohnosec.org
>
> When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..."
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users@ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users