The same way you set tx audio level with any other kind of Allstar device.

Put the connected node into 1KHz test mode (cop,4), and tune for 3KHz
deviation out the tx @1KHz (plus level, usually about 700 Hz for CTCSS tone).

JIM WB6NIL

> From: conny@n5hc.com
> Date: Sun, 19 Feb 2012 10:25:22 -0700
> To: app_rpt-users@ohnosec.org
> Subject: [App_rpt-users] RTCM Audio TX Audio Level.
>
> Any best practice procedure to adjust the RTCM TX Audio Level in "General Purpose" mode and/or offline mode?
>
> 73 de N5HC
>
> /Conny
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users@ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users