Based on that info, what you could do is set up 2 Allstar nodes on one box and setup one echolink node.
Connect each node to repeater. That way its the same as having 2 boxes (actually simpler) and both nodes can access the echolink.

Jon VA3RQ

On 4/9/2011 7:18 AM, Jim Duuuude wrote:

Well, an installation of Echolink running on 2 nodes behind the same IP address
can only be found with the Easter Bunny, Santa Claus, all the left socks that were
ever lost in the laundry and competent, reliable drummers.

In other words, it doesn't exist. The design of their protocol simply DOES NOT
allow for such a thing. In their world, it's a unique mapping of one node to one
IP address at a fixed port number set ONLY. That's it. Over and out.

JIM WB6NIL

From: rpt2@chuck.midlandsnetworking.com
Date: Sat, 9 Apr 2011 04:40:02 -0500
To: app_rpt-users@ohnosec.org
Subject: [App_rpt-users] 2 systems on one LAN, each with an echolink number?

I have 2 AllStarLink systems on one LAN. Each is for a separate repeater system with a separate computer. They share a common Internet address.
For AllStar they work fine. For EchoLink I can only make one or the other of them work, but not both.

Is there a way to change the port number of one of the echolink nodes so that they can both use the same Internet address?

We want them both to be able to have inbound and outbound connections via echolink, independent of each other.

Chuck

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users