This is in the messages log after a reboot now:

[Dec 26 00:06:21] WARNING[941] channel.c: Channel allocation failed: Refusing du
e to active shutdown
[Dec 26 00:06:21] WARNING[941] chan_simpleusb.c: Unable to create new usb channe
l
[Dec 26 00:06:21] NOTICE[944] dnsmgr.c: Managed DNS entries will be refreshed ev
ery 300 seconds.
[Dec 26 00:06:21] NOTICE[944] cdr.c: CDR simple logging enabled.
[Dec 26 00:06:21] NOTICE[944] loader.c: 54 modules will be loaded.
[Dec 26 00:06:21] WARNING[944] acl.c:  is not a valid IP
[Dec 26 00:06:21] WARNING[944] chan_simpleusb.c: File simpleusb_tune_usb45467.co
nf not found, using default parameters.
[Dec 26 00:06:21] NOTICE[961] app_rpt.c: Normal Repeater Init  45467
[Dec 26 00:06:22] NOTICE[982] chan_simpleusb.c: Assigned USB device 3-2:1.0 to s
impleusb channel usb45467
[Dec 26 00:06:22] WARNING[982] chan_simpleusb.c: File simpleusb_tune_usb45467.co
nf not found, device usb45467 using default parameters.
[Dec 26 00:06:22] WARNING[981] chan_simpleusb.c: Possibly stuck USB read channel
. [usb45467]
[Dec 26 00:06:22] WARNING[981] chan_simpleusb.c: Nope, USB read channel [usb4546
7] wasn't stuck after all.



the simpleusb_tune_usb45467.conf is present in \etc\asterisk



Keith Dobbins
Sr. IT Systems Engineer
Managed File Transfer/Mainframe Networks
3402 Linden Street Parkersburg, WV 26104-1608  
 Amateur Radio Call Sign: N8KLD


On Tuesday, December 26, 2017, 11:40:18 AM EST, Steve Zingman <szingman@msgstor.com> wrote:


Which channel driver are you using?
Anything in the log?

73, Steve N4IRS

On 12/26/2017 11:30 AM, Keith Dobbins wrote:
I had my node working under ACID till a hard drive decided to crash on me. I did the re-install with the 32 bit DIAL install. Everything about the node appears to function properly but from asterisk to my URI I get ZERO audio in or out. It's the only audio adapter, and the URIDIAG with the loopback plug tests fine. It will activate the TX and I get the blinking green led but no audio in or out. Is there somewhere I can look to troubleshoot this issue? The motherboard is an older atom 330 board. Should I fall back to the older ACID install for this node which had worked.

Thanks for any guidance that you can provide.
Keith Dobbins N8KLD


_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.