You are correct.  Your node(s) will still use IAX they just won't register with the allstar server on the WAN.  You "should" have at least one public node on the server because of eula and terms of service for the allstar system.


On Tue, Sep 17, 2013 at 2:35 PM, Bill Hurlock <bill.hurlock@cpcomms.com> wrote:

I believe what he was saying is that you don’t want to register IAX with allstar.org and you don’t want to enable node status reports to Allstar.org. This has nothing to do with being able to use IAX on a private node.

 

Bill Hurlock

 

From: Jeff Carrier [mailto:k0jsc.jeff@gmail.com]
Sent: Tuesday, September 17, 2013 4:03 PM
To: Geoff Edmonson
Cc: Bill Hurlock; app_rpt mailing list
Subject: Re: [App_rpt-users] IAXrtp setup for multiple nodes on one server

 

 

On Tue, Sep 17, 2013 at 1:58 PM, Geoff Edmonson <ars.w5omr@gmail.com> wrote:

In fact...

" Private networks are built with a) node numbers under 2000, b) no iax registration, c) no status reporting and d) the IP address of each of the other nodes is in the nodes stanza."




Bill Hurlock <bill.hurlock@cpcomms.com> wrote:

I have 2 nodes running on one server. How do I configure IAXrpt to be directed to the right node on the server. One node is 1989 and the other 1990.

 

Bill Hurlock

CPCommunications

856-234-1661 Office

856-264-1010 Cell

www.cpcomms.com

WA2TQI

 


_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users