On Sun, Dec 2, 2012 at 4:09 PM, Tim Sawyer <tim.sawyer@mac.com> wrote:

Yep, you should always upgrade from SVN after a fresh install of ACID. The IOS image is out of date.

Be sure port 5038 or whatever port you are using for the Asterisk Manager is forwarded to you web server. Note, almon.ini should point to the external address of the Asterisk Manager on each Allstar node server. Be sure manager.conf on each node allows all clients (0.0.0.0) or your web server's address.

The web server doesn't need to be run on any of your nodes. In fact, you probably shouldn't do that unless you are sure that won't clobber your node's performance. I recommend using a separate from your node web server.

--
Tim
:wq

On Dec 2, 2012, at 8:24 AM, Brian Burton <kb3ors@gmail.com> wrote:

Jim just an FYI. I did a fresh install of ACID last night. I then installed allmon. When veiwing the allmon anytime there was a keyup the page did not turn green. I then updated to the latest astsrc and all was good. I would have thought that would have already been part of a new install.

On a side note I am trying to get a couple of seperate servers to show up on one server page. Currently I have all the boxes open to the web. Same ports on all, login and passwds same on all. IP addresses allmon.ini pointing to the external IP of the external server. Webpage only shows local node. Anyone with suggestions? Or is there something I have skipped?

Thanks

Sat, Dec 1, 2012 at 12:00 PM, <app_rpt-users-request@ohnosec.org> wrote:

Send App_rpt-users mailing list submissions to
app_rpt-users@ohnosec.org

To subscribe or unsubscribe via the World Wide Web, visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
or, via email, send a message with subject or body 'help' to
app_rpt-users-request@ohnosec.org

You can reach the person managing the list at
app_rpt-users-owner@ohnosec.org

When replying, please edit your Subject line so it is more specific
than "Re: Contents of App_rpt-users digest..."

Today's Topics:

1. Re: Help Motorola GM300 and app_rpt (Keith Goobie)
2. Re: Help Motorola GM300 and app_rpt (FERNANDO VILLARROEL)
3. Re: Help Motorola GM300 and app_rpt (Matt Roberts)
4. Re: Help Motorola GM300 and app_rpt (FERNANDO VILLARROEL)

----------------------------------------------------------------------

Message: 1
Date: Fri, 30 Nov 2012 14:37:28 -0400
From: Keith Goobie <keith@goobie.org>
To: Fernando Villarroel <fvillarroel@yahoo.com>
Cc: APP RPT <App_rpt-users@ohnosec.org>
Subject: Re: [App_rpt-users] Help Motorola GM300 and app_rpt
Message-ID: <B78A1D10-B416-4B6B-A52D-437B665EEFFA@goobie.org>
Content-Type: text/plain; charset="utf-8"

I am on iPhone right now. Will do when I get home.

Keith

Sent from my iPhone

On Nov 30, 2012, at 2:20 PM, Fernando Villarroel <fvillarroel@yahoo.com> wrote:

> Dear Keith.
>
> Do you could tell me a sample config for usbradio.conf and rpt.conf because i can't doing work, or how i can do.
>
> Thank you for you help.
>
> Enviado desde mi iPhone
>
> El 30-11-2012, a las 13:58, Keith Goobie <keith@goobie.org> escribi?:
>
>> Simplex is not a cable design issue. It is controlled from rpt.conf and usbradio.conf
>>
>> Keith
>>
>> Sent from my iPhone
>>
>> On Nov 30, 2012, at 12:53 PM, David KE6UPI <dshaw@ke6upi.com> wrote:
>>
>>> Are you using one radio in simplex mode? If so you need a simplex cable. http://www.uricables.com/motorola.html
>>>
>>> David
>>>
>>>
>>> On Fri, Nov 30, 2012 at 8:15 AM, FERNANDO VILLARROEL <fvillarroel@yahoo.com> wrote:
>>>> Dear All.
>>>>
>>>> I have installed ACID succesfully
>>>>
>>>> I have the follows devices connected:
>>>>
>>>> Motorola GM300 conected to my Asterisk (Centos)
>>>>
>>>> http://www.dmkeng.com/URI_Order_Page.htm
>>>>
>>>> http://www.uricables.com/DuplexMotorola.html (i have connected from RX Cable)
>>>>
>>>> I am trying to doing PTT from Zoiper and IAXrpt, but not works. I do not understand why.
>>>>
>>>> http://allstarnode.com/viewtopic.php?f=5&t=67
>>>>
>>>> When i try to do *98 i have not audio in radio base and mobiles radios (handy).
>>>>
>>>> Does anyone tell me what is the best config for usbradio.conf and rpt.conf?
>>>>
>>>> I hope anyone could help me or how i can do.
>>>>
>>>> Fernando
>>>>
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users@ohnosec.org
>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users@ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20121130/4e6b9ba4/attachment-0001.html>

------------------------------

Message: 2
Date: Fri, 30 Nov 2012 10:46:03 -0800 (PST)
From: FERNANDO VILLARROEL <fvillarroel@yahoo.com>
To: Keith Goobie <keith@goobie.org>
Cc: APP RPT <App_rpt-users@ohnosec.org>
Subject: Re: [App_rpt-users] Help Motorola GM300 and app_rpt
Message-ID:
<1354301163.31052.YahooMailClassic@web162005.mail.bf1.yahoo.com>
Content-Type: text/plain; charset="iso-8859-1"

Ok Keith.
Thank You so much, i am trying to solve this issue from a long time (3 weeks).
I can send the access root for my ACID installation and my MSN ID or Skype, if you want.

Regards

--- On Fri, 11/30/12, Keith Goobie <keith@goobie.org> wrote:

From: Keith Goobie <keith@goobie.org>
Subject: Re: [App_rpt-users] Help Motorola GM300 and app_rpt
To: "Fernando Villarroel" <fvillarroel@yahoo.com>
Cc: "David KE6UPI" <dshaw@ke6upi.com>, "APP RPT" <App_rpt-users@ohnosec.org>
Date: Friday, November 30, 2012, 2:37 PM

I am on iPhone right now. ?Will do when I get home.?
Keith

Sent from my iPhone
On Nov 30, 2012, at 2:20 PM, Fernando Villarroel <fvillarroel@yahoo.com> wrote:

Dear Keith.
Do you could tell me a sample config for usbradio.conf and rpt.conf because i can't doing work, or how i can do.
Thank you for you help.

Enviado desde mi iPhone
El 30-11-2012, a las 13:58, Keith Goobie <keith@goobie.org> escribi?:

Simplex is not a cable design issue. ?It is controlled from rpt.conf and usbradio.conf
Keith

Sent from my iPhone
On Nov 30, 2012, at 12:53 PM, David KE6UPI <dshaw@ke6upi.com> wrote:

Are you using one radio in simplex mode? If so you need a simplex cable.?http://www.uricables.com/motorola.html
David

On Fri, Nov 30, 2012 at 8:15 AM, FERNANDO VILLARROEL <fvillarroel@yahoo.com> wrote:

Dear All.

I have installed ACID succesfully

I have the follows devices connected:

Motorola GM300 conected to my Asterisk (Centos)

http://www.dmkeng.com/URI_Order_Page.htm

http://www.uricables.com/DuplexMotorola.html (i have connected from RX Cable)

I am trying to doing PTT from Zoiper and IAXrpt, but not works. I do not understand why.

http://allstarnode.com/viewtopic.php?f=5&t=67

When i try to do *98 i have not audio in radio base and mobiles radios (handy).

Does anyone tell me what is the best config for usbradio.conf and rpt.conf?

I hope anyone could help me or how i can do.

Fernando

_______________________________________________

App_rpt-users mailing list

App_rpt-users@ohnosec.org

http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20121130/723a5ad0/attachment-0001.html>

------------------------------

Message: 3
Date: Fri, 30 Nov 2012 15:59:30 -0500
From: Matt Roberts <n9gmr@me.com>
To: Fernando Villarroel <fvillarroel@yahoo.com>
Cc: APP RPT <App_rpt-users@ohnosec.org>
Subject: Re: [App_rpt-users] Help Motorola GM300 and app_rpt
Message-ID: <6FBEE34B-6FE3-4EE5-98A7-7EC8E9FB4C0D@me.com>
Content-Type: text/plain; CHARSET=US-ASCII

On Nov 30, 2012, at 1:20 PM, Fernando Villarroel wrote:

> Do you could tell me a sample config for usbradio.conf and rpt.conf because i can't doing work, or how i can do.
>
I don't think your configuration files are the issue themselves. Does your node work? Can you transmit to your node, and when people transmit from other nodes can you hear them? Is cop6 defined in RPT.conf? Cop6 determines what command is used to activate PTT on the phone. Has anyone tried connecting to your node from the portal on the phone and see if what is said is going out over your node?

Matt Roberts
n9gmr@me.com
Call Sign N9GMR
Allstar 28142
EchoLink 640860

------------------------------

Message: 4
Date: Fri, 30 Nov 2012 17:41:05 -0800 (PST)
From: FERNANDO VILLARROEL <fvillarroel@yahoo.com>
To: Matt Roberts <n9gmr@me.com>
Cc: APP RPT <App_rpt-users@ohnosec.org>
Subject: Re: [App_rpt-users] Help Motorola GM300 and app_rpt
Message-ID:
<1354326065.79670.YahooMailClassic@web162006.mail.bf1.yahoo.com>
Content-Type: text/plain; charset=iso-8859-1

Dear Matt.

My ACID is a local installation.

Yes, i did defined cop6 in rpt.conf

I have not other nodes connected with this node (1999)

The radio base (Motorola GM300) and mobiles radios (handys) can transmit very well between both.

I can call from Zoiper and IAXrpt to Radio Base (1999) and i can doing the following commands:

6=autopatchup,noct=1,farenddisconnect=1,dialtime=20000
0=autopatchdn ; Autopatch down

99=cop,4 ; Audio test tone
98=cop,6 ; Phone TX key

But COP6 not works or i can't PTT from softphnes to handys.

I can call from handy to PSTN and CellPhones.

When i run the following commands Asterisk show me:

test*CLI> radio tune rxnoise
tune rxnoise maxtries=12, target=23000, tolerance=2750
tries=0, setting=2, meas=7323
tries=1, setting=6, meas=14436
tries=2, setting=10, meas=26213
tries=3, setting=9, meas=25173
tries=4, setting=9, meas=25229
tries=5, setting=9, meas=25107
tries=6, setting=9, meas=25344
DONE tries=6, setting=563, meas=25344, sqnoise=8140
INFO: RX INPUT ADJUST SUCCESS.

test*CLI> radio tune rxvoice
INFO: RX VOICE ADJUST START.
target=7200 tolerance=360
tries=0, setting=1.000000, meas=17354
tries=1, setting=0.414890, meas=7179
tries=2, setting=0.416104, meas=7674
tries=3, setting=0.390402, meas=6842
tries=4, setting=0.390402, meas=6866
tries=5, setting=0.390402, meas=6956
DONE tries=5, setting=0.390402, meas=6956.000000
INFO: RX VOICE GAIN ADJUST SUCCESS.

Regards.

--- On Fri, 11/30/12, Matt Roberts <n9gmr@me.com> wrote:

> From: Matt Roberts <n9gmr@me.com>
> Subject: Re: [App_rpt-users] Help Motorola GM300 and app_rpt
> To: "Fernando Villarroel" <fvillarroel@yahoo.com>
> Cc: "Keith Goobie" <keith@goobie.org>, "APP RPT" <App_rpt-users@ohnosec.org>
> Date: Friday, November 30, 2012, 4:59 PM
>
> On Nov 30, 2012, at 1:20 PM, Fernando Villarroel wrote:
>
> > Do you could tell me a sample config for usbradio.conf
> and rpt.conf because i can't doing work, or how i can do.
> >
> I don't think your configuration files are the issue
> themselves.? Does your node work? Can you transmit to
> your node, and when people transmit from other nodes can you
> hear them? Is cop6 defined in RPT.conf? Cop6 determines what
> command is used to activate PTT on the phone.? Has
> anyone tried connecting to your node from the portal on the
> phone and see if what is said is going out over your node?
>
>
> Matt Roberts
> n9gmr@me.com
> Call Sign N9GMR
> Allstar 28142
> EchoLink 640860
>
>

------------------------------

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

End of App_rpt-users Digest, Vol 46, Issue 1
********************************************

--
Brian
KB3ORS

WAN-RS Tech Support

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

--
Brian

KB3ORS

Trustee W3WAN

WAN-RS Tech Support