Im curious why you didn't use two URIx's which can address the gm300 programmable channel steering lines directly with user functions to control all 40 channels. (no buffering required) Works good.

I can tell you had lots of fun though and saved the price of the URIx's.

Ross

ve6ars

Today's Topics:

1. 40 channel remote base GM300! (Skyler Fennell)

----------------------------------------------------------------------

Message: 1
Date: Wed, 22 Jun 2016 10:03:23 -0600
From: Skyler Fennell <electricity440@gmail.com>
To: app_rpt-users@ohnosec.org
Subject: [App_rpt-users] 40 channel remote base GM300!
Message-ID: <D29FAAB5-42CC-4276-A3E7-F4616CA72D09@gmail.com>
Content-Type: text/plain; charset="utf-8"

I managed to steer to any of the 40 GM300 channels with AllStar link and custom scripts. I am going to deploy this 40 channel VHF remote and a 20 channel UHF on a mountaintop with a wireless internet service provider.

Binary select only lets me get to 16 channels, so my method controls the front panel directly.

It's been a pretty fun project, but it has been a pain messing with the event handler in Allstar to get everything to work properly. Due to limitations, I had to set up the base as a standard node and write customizations for user log in to enable the transmitter.

Here is the video

https://youtu.be/ZY9pfy5F4hw

73
Skyler KD?WHB
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20160622/6b41219a/attachment-0001.html>