I have purchased a new URI from DMK and have the same problem, I plan to move it to channel B and see if it fails. I know enough about Linux to move around and execute files but wasn't sure if Asterisk was killing the channel and don't really know how to check.


Sent from my Verizon Wireless 4G LTE smartphone


-------- Original message --------
From: app_rpt-users-request@ohnosec.org
Date: 11/15/2014 10:46 (GMT-05:00)
To: app_rpt-users@ohnosec.org
Subject: App_rpt-users Digest, Vol 69, Issue 28

Send App_rpt-users mailing list submissions to
app_rpt-users@ohnosec.org

To subscribe or unsubscribe via the World Wide Web, visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
or, via email, send a message with subject or body 'help' to
app_rpt-users-request@ohnosec.org

You can reach the person managing the list at
app_rpt-users-owner@ohnosec.org

When replying, please edit your Subject line so it is more specific
than "Re: Contents of App_rpt-users digest..."


Today's Topics:

   1. Re: App_rpt-users Channel A audio lost (mark@tinney.us)
   2. Re: App_rpt-users Channel A audio lost (Doug Crompton)


----------------------------------------------------------------------

Message: 1
Date: Sat, 15 Nov 2014 09:30:12 -0500
From: <mark@tinney.us>
To: <app_rpt-users@ohnosec.org>
Subject: Re: [App_rpt-users] App_rpt-users Channel A audio lost
Message-ID: <A158DC121ED446D0BF82334CCD795451@MkTinneyPC>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original

I am not sure if this is how I get help but here is my question:

I have a BBB running and everything works fine until I eventually start
getting a carrier only on channel A audio output, I have audio on channel B
when A is not working as I have channel B setup as a monitor in the repeater
building. Do you have any suggestions for me to try to figure out this
problem?

Thanks,
Mark
W4GVX

-----Original Message-----
From: app_rpt-users-request@ohnosec.org
Sent: Friday, November 14, 2014 12:00 PM
To: app_rpt-users@ohnosec.org
Subject: App_rpt-users Digest, Vol 69, Issue 26

Send App_rpt-users mailing list submissions to
app_rpt-users@ohnosec.org

To subscribe or unsubscribe via the World Wide Web, visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
or, via email, send a message with subject or body 'help' to
app_rpt-users-request@ohnosec.org

You can reach the person managing the list at
app_rpt-users-owner@ohnosec.org

When replying, please edit your Subject line so it is more specific
than "Re: Contents of App_rpt-users digest..."


Today's Topics:

   1. Re: Echolink_and_app_rpt:_Looking_for_m
      ore_information_on_permit=*-* (ea8ee)
   2. Re: Echolink_and_app_rpt:_Looking_for_m
      ore_information_on_permit=*-* (Stephen Curtis)


----------------------------------------------------------------------

Message: 1
Date: Fri, 14 Nov 2014 09:41:18 +0000
From: ea8ee <ea8ee1@gmail.com>
To: Robert Newberry <N1XBM@amsat.org>
Cc: app_rpt mailing list <app_rpt-users@ohnosec.org>
Subject: Re: [App_rpt-users] Echolink_and_app_rpt:_Looking_for_m
ore_information_on_permit=*-*
Message-ID:
<CADJ3RdTVXYNbJpZi3SzJe6s3PkQ3oVct=j9uUu3Ba+Si9cOHww@mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"

how active the vox mode in zoiper? maybe with a dmtf numbers?

2014-11-12 19:14 GMT+00:00 Robert Newberry <N1XBM@amsat.org>:

> I think this has come up before,  but if you have a spare PC you can
> create a account on your box for zoiper set it for vox. Then get zello for
> PC and create a account for you node. Then create a channel for your node.
> Place the account into the repeater channel.  Use virtual audio cables and
> point zello to zoiper and cross the cables. Works slicker than sh*t!
> Obviously your zoiper connection is left up full time. Also I password
> protect my channel.
>
> Feel free to connect to my node and I'll give you a demo.
>
> We have a regular user who is over the road trucker and zello plays nice
> with his blue parrot headset also much more "PTT radio like" friendly.
> Also I can record repeater activity too!
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users@ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://ohnosec.org/pipermail/app_rpt-users/attachments/20141114/d789b453/attachment-0001.html>

------------------------------

Message: 2
Date: Fri, 14 Nov 2014 10:07:56 +0000
From: Stephen Curtis <steve@m0hoy.com>
To: ea8ee <ea8ee1@gmail.com>
Cc: app_rpt mailing list <app_rpt-users@ohnosec.org>
Subject: Re: [App_rpt-users] Echolink_and_app_rpt:_Looking_for_m
ore_information_on_permit=*-*
Message-ID: <059961A7-71F7-452A-BA40-F53255E73CD4@m0hoy.com>
Content-Type: text/plain; charset="iso-8859-1"

In extensions.conf final line add lowercase v after the P


> exten=00000,1,answer()
> exten=00000,n,Playback(rpt/node)
> exten=00000,n,Playback(digits/0)            ;Change this to your node
> number - this is what it plays when you connect
> exten=00000,n,Playback(digits/0)            ;Change this to your node
> number - this is what it plays when you connect
> exten=00000,n,Playback(digits/0)            ;Change this to your node
> number - this is what it plays when you connect
> exten=00000,n,Playback(digits/0)            ;Change this to your node
> number - this is what it plays when you connect
> exten=00000,n,Playback(digits/0)            ;Change this to your node
> number - this is what it plays when you connect
> exten=00000,n,Playback(rpt/connected)

> exten=00000,n,rpt(0000|Pv)





> On 14 Nov 2014, at 09:41, ea8ee <ea8ee1@gmail.com> wrote:
>
> how active the vox mode in zoiper? maybe with a dmtf numbers?
>
> 2014-11-12 19:14 GMT+00:00 Robert Newberry <N1XBM@amsat.org
> <mailto:N1XBM@amsat.org>>:
> I think this has come up before,  but if you have a spare PC you can
> create a account on your box for zoiper set it for vox. Then get zello for
> PC and create a account for you node. Then create a channel for your node.
> Place the account into the repeater channel.  Use virtual audio cables and
> point zello to zoiper and cross the cables. Works slicker than sh*t!
> Obviously your zoiper connection is left up full time. Also I password
> protect my channel.
>
> Feel free to connect to my node and I'll give you a demo.
>
> We have a regular user who is over the road trucker and zello plays nice
> with his blue parrot headset also much more "PTT radio like" friendly.
> Also I can record repeater activity too!
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org>
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll
> down to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users@ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://ohnosec.org/pipermail/app_rpt-users/attachments/20141114/244a0c78/attachment-0001.html>

------------------------------

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users


End of App_rpt-users Digest, Vol 69, Issue 26
*********************************************



-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4765 / Virus Database: 4189/8571 - Release Date: 11/14/14



------------------------------

Message: 2
Date: Sat, 15 Nov 2014 10:46:40 -0500
From: Doug Crompton <doug@crompton.com>
To: "mark@tinney.us" <mark@tinney.us>
Cc: "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org>
Subject: Re: [App_rpt-users] App_rpt-users Channel A audio lost
Message-ID: <BLU172-W383F2071A0A71758BDCD29BA8D0@phx.gbl>
Content-Type: text/plain; charset="iso-8859-1"

Perhaps you have a bad USB FOB. Did you try another? Are you sure the sudio is not being interrupted outside of the FOB? Can you switch the channels physically outside the FOB?
73 Doug
WA3DSP
http://www.crompton.com/hamradio


> From: mark@tinney.us
> To: app_rpt-users@ohnosec.org
> Date: Sat, 15 Nov 2014 09:30:12 -0500
> Subject: Re: [App_rpt-users] App_rpt-users Channel A audio lost
>
> I am not sure if this is how I get help but here is my question:
>
> I have a BBB running and everything works fine until I eventually start
> getting a carrier only on channel A audio output, I have audio on channel B
> when A is not working as I have channel B setup as a monitor in the repeater
> building. Do you have any suggestions for me to try to figure out this
> problem?
>
> Thanks,
> Mark
> W4GVX
>
> -----Original Message-----
> From: app_rpt-users-request@ohnosec.org
> Sent: Friday, November 14, 2014 12:00 PM
> To: app_rpt-users@ohnosec.org
> Subject: App_rpt-users Digest, Vol 69, Issue 26
>
> Send App_rpt-users mailing list submissions to
> app_rpt-users@ohnosec.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> or, via email, send a message with subject or body 'help' to
> app_rpt-users-request@ohnosec.org
>
> You can reach the person managing the list at
> app_rpt-users-owner@ohnosec.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of App_rpt-users digest..."
>
>
> Today's Topics:
>
>    1. Re: Echolink_and_app_rpt:_Looking_for_m
>       ore_information_on_permit=*-* (ea8ee)
>    2. Re: Echolink_and_app_rpt:_Looking_for_m
>       ore_information_on_permit=*-* (Stephen Curtis)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Fri, 14 Nov 2014 09:41:18 +0000
> From: ea8ee <ea8ee1@gmail.com>
> To: Robert Newberry <N1XBM@amsat.org>
> Cc: app_rpt mailing list <app_rpt-users@ohnosec.org>
> Subject: Re: [App_rpt-users] Echolink_and_app_rpt:_Looking_for_m
> ore_information_on_permit=*-*
> Message-ID:
> <CADJ3RdTVXYNbJpZi3SzJe6s3PkQ3oVct=j9uUu3Ba+Si9cOHww@mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> how active the vox mode in zoiper? maybe with a dmtf numbers?
>
> 2014-11-12 19:14 GMT+00:00 Robert Newberry <N1XBM@amsat.org>:
>
> > I think this has come up before,  but if you have a spare PC you can
> > create a account on your box for zoiper set it for vox. Then get zello for
> > PC and create a account for you node. Then create a channel for your node.
> > Place the account into the repeater channel.  Use virtual audio cables and
> > point zello to zoiper and cross the cables. Works slicker than sh*t!
> > Obviously your zoiper connection is left up full time. Also I password
> > protect my channel.
> >
> > Feel free to connect to my node and I'll give you a demo.
> >
> > We have a regular user who is over the road trucker and zello plays nice
> > with his blue parrot headset also much more "PTT radio like" friendly.
> > Also I can record repeater activity too!
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users@ohnosec.org
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> > to the bottom of the page. Enter your email address and press the
> > "Unsubscribe or edit options button"
> > You do not need a password to unsubscribe, you can do it via email
> > confirmation. If you have trouble unsubscribing, please send a message to
> > the list detailing the problem.
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> <http://ohnosec.org/pipermail/app_rpt-users/attachments/20141114/d789b453/attachment-0001.html>
>
> ------------------------------
>
> Message: 2
> Date: Fri, 14 Nov 2014 10:07:56 +0000
> From: Stephen Curtis <steve@m0hoy.com>
> To: ea8ee <ea8ee1@gmail.com>
> Cc: app_rpt mailing list <app_rpt-users@ohnosec.org>
> Subject: Re: [App_rpt-users] Echolink_and_app_rpt:_Looking_for_m
> ore_information_on_permit=*-*
> Message-ID: <059961A7-71F7-452A-BA40-F53255E73CD4@m0hoy.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> In extensions.conf final line add lowercase v after the P
>
>
> > exten=00000,1,answer()
> > exten=00000,n,Playback(rpt/node)
> > exten=00000,n,Playback(digits/0)            ;Change this to your node
> > number - this is what it plays when you connect
> > exten=00000,n,Playback(digits/0)            ;Change this to your node
> > number - this is what it plays when you connect
> > exten=00000,n,Playback(digits/0)            ;Change this to your node
> > number - this is what it plays when you connect
> > exten=00000,n,Playback(digits/0)            ;Change this to your node
> > number - this is what it plays when you connect
> > exten=00000,n,Playback(digits/0)            ;Change this to your node
> > number - this is what it plays when you connect
> > exten=00000,n,Playback(rpt/connected)
>
> > exten=00000,n,rpt(0000|Pv)
>
>
>
>
>
> > On 14 Nov 2014, at 09:41, ea8ee <ea8ee1@gmail.com> wrote:
> >
> > how active the vox mode in zoiper? maybe with a dmtf numbers?
> >
> > 2014-11-12 19:14 GMT+00:00 Robert Newberry <N1XBM@amsat.org
> > <mailto:N1XBM@amsat.org>>:
> > I think this has come up before,  but if you have a spare PC you can
> > create a account on your box for zoiper set it for vox. Then get zello for
> > PC and create a account for you node. Then create a channel for your node.
> > Place the account into the repeater channel.  Use virtual audio cables and
> > point zello to zoiper and cross the cables. Works slicker than sh*t!
> > Obviously your zoiper connection is left up full time. Also I password
> > protect my channel.
> >
> > Feel free to connect to my node and I'll give you a demo.
> >
> > We have a regular user who is over the road trucker and zello plays nice
> > with his blue parrot headset also much more "PTT radio like" friendly.
> > Also I can record repeater activity too!
> >
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org>
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> > <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
> >
> > To unsubscribe from this list please visit
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> > <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll
> > down to the bottom of the page. Enter your email address and press the
> > "Unsubscribe or edit options button"
> > You do not need a password to unsubscribe, you can do it via email
> > confirmation. If you have trouble unsubscribing, please send a message to
> > the list detailing the problem.
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users@ohnosec.org
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> > to the bottom of the page. Enter your email address and press the
> > "Unsubscribe or edit options button"
> > You do not need a password to unsubscribe, you can do it via email
> > confirmation. If you have trouble unsubscribing, please send a message to
> > the list detailing the problem.
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> <http://ohnosec.org/pipermail/app_rpt-users/attachments/20141114/244a0c78/attachment-0001.html>
>
> ------------------------------
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users@ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
> End of App_rpt-users Digest, Vol 69, Issue 26
> *********************************************
>
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2014.0.4765 / Virus Database: 4189/8571 - Release Date: 11/14/14
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users@ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
    
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20141115/3268a8a6/attachment.html>

------------------------------

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users


End of App_rpt-users Digest, Vol 69, Issue 28
*********************************************