Iax_rpt was originally written to support xipar distro. So in steve's xipar app_rpt implementation the the scan feature will work with
that version of allstar compatible software. But it will not work with the acid version of allstar software because the code was never
added to support the scan feature of iax_rpt.

otherwise if you run xipar the scan feature will work very well for you. Otherwise with acid it is a no go.

I have tested and ran both version of the software that is why i know this.

ken n1dot



On 7/4/2014 11:14 PM, James R. Pilgram wrote:
Aloha,
Trying to get the SCAN feature of the iaxRpt Client to work. I have multiple nodes not connected together that I would like to be able to monitor when they become active.

I have checked the help and support tab and google to no avail. I find mentions but no explanations of what the tick boxes actually do.

Looking at the Options/Preferences/Scan tab, in the box next to SCAN TYPE: there are no options. What should go in there if anything? Is there a "poop sheet" on setting this up that I missed. Any help appreciated.

Jim NH6HI


_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.