And you should be able to share the same GPS for all RTCMs that are co-located at the same sites.

 

From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Tim Sawyer
Sent: Tuesday, September 17, 2013 12:36 PM
To: Sam Skolfield
Cc: Bill Hurlock; app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] Multi Node Voter questions

 

One master can support one or more nodes, each node with one or more clients.  The master must be on the node with the RTCM that is on the same ethernet segment as the server. Here's a sample config...

 

[general]

 

port = 667

password = xxxxxxx

 

[2521]

Blueridge = aaaa1,transmit

buflen = 500

 

[2529]

SanJuan = xxxx1,transmit

buflen = 500

plfilter = yes

 

[2531]

Santiago-UHF = rxxxy1,transmit

Lukens-UHF = rxxxy2,transmit

Sunset-UHF = rxxxy3,transmit

PV-UHF = rxxxy4,transmit

TestUHF = rxxxy5,nodeemp

buflen = 180

thresholds = 255,110=5

linger=15

txctcss = 136.5

txctcsslevel = 55

txtoctype = notone

;streams = 184.154.228.18:1667

;streams = wd6awp.net:1667

plfilter = yes

 

[2532]

Santiago = yyy1,transmit

Huntington = yyy2,master,transmit

PV = yyy3

Woodfern = yyy4

TestBench = yyy5,transmit

buflen = 200

thresholds = 255,110=5

linger=15

plfilter = yes

 

--
Tim
:wq

 

On Sep 17, 2013, at 8:06 AM, Sam Skolfield <kj6qfs@gmail.com> wrote:



Correct me if I am wrong, but an app_rpt server can only handle one master timing source. Wouldn't that throw a wrench in the possibility of running multiple voted nodes on one server?

 

On Tue, Sep 17, 2013 at 4:38 AM, Bill Hurlock <bill.hurlock@cpcomms.com> wrote:

I need to put together a private node network that has 12 separate repeaters with 2 voting sites each. The systems are all co located on one rooftop. The voter paths will be over Ubiquity rocket IP networks.

The questions are,

1.       How many nodes can be run on a single server with each node containing 1 main TX/RX and 2 voting sites?

2.       How do you config the nodes to not be part of the Allstar network?

3.       Is there a recommended PC configuration for a server , i.e. CPU speed, Memory, etc.?

 

Bill Hurlock

CPCommunications

856-234-1661 Office

856-264-1010 Cell

www.cpcomms.com

WA2TQI

 


_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users



 

--
KJ6QFS
Sam Skolfield

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users