It was to begin with, but I commented it out, and still nothing.
 
Andrew.

From: Steve Agee <n5zua@earthlink.net>
To: app_rpt-users@ohnosec.org
Sent: Wednesday, July 29, 2015 2:00 AM
Subject: Re: [App_rpt-users] enabling courtesy tones

you don't have them disabled with a line reading:

[2433]
nounkeyct=1

do you?

N5ZUA



On 7/28/2015 11:37 PM, KD8USF wrote:
I've tried to enable the courtesy tones but nothing happens, is there a line I need to add to the config to enable it? I'm just trying to use the defaults to start with.

These lines are uncommented:

unlinkedct=ct2
remotect=ct3
linkunkeyct=ct8

The only tone that does work is the command tone...

Thanks.
Andrew.


_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.


_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.