The manual install is not working, and my RAID is not working either.
I plug in the URI and it flashes a few times and then is steady. Radio-tune-menu then does not work. The manual install also made my ethernet stop working so I had to go into a network conf file and add it back.
RAID 1 is not working either. I physically unplug a hard drive and boot it, and I get a bunch of errors.
CentOS plays a l o t better with RAID 1. ACID was previously installed and had no problem with the hardware raid.
Any suggestions of what to try next? I have tried N4IRS's script as well as W0JRL's debian install, none of them work. Right now I just disabled RAID and am installing DIAL on one of the disks, but I still want to use both so if one fails at the site.
How does one copy kernel modules to get the raid working?
This is server hardware.
On Sun, Dec 13, 2015 at 3:08 PM, Shamim Shahriar <shamim.shahriar@gmail.com> wrote:
Hi Skyler, this might not be an ideal solution, and you might have
On 13/12/2015 18:49, Skyler F wrote:
> Does anybody have or know where there are scripts to install AllStar
> from Debian.
>
> For a setup for a repeater site am using a server computer with two
> hard drives in a RAID1 configuration so if one is to fail on this 10
> year old machine, it will still work.
>
> I was not able to get DIAL installed but was able to get Debian to work.
>
> Thanks
> Skyler
> KD0WHB
>
already tried it. In cases like this , I have always found that that
installing the system on a known working system, later DD-ing the disc
image and booting into single user mode and fixing things so that
reflects the new hardware can also be an option. If the kernel versions
are the same, you might even be able to just copy over the kernel
modules required to have the raid working or other issues resolved. Have
you considered this option?
Hope this helps
All the best.
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
--
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic