Sounds like you are asking if you can register with more than one system using the same node ID number.

If you look at your iax.conf file, you will see a line similar to:

register=<nodenumber>:<password>@site

<nodenumber> = your node number
<password> = your password

What you haven't told us is what node number you are registering as.  Are you actually using your AllStar node number or are you using a private node number in the range of 1xxx?

I'm not sure how AppRpt will handle having a single node number registered on multple systems, although the underlying registration process is handled by asterisk and not AppRpt itself.  It "should" work, but you never know until you try it out.  You would just have to make sure that if you tried this, you aren't bringing in the same audio source from multiple channels (effectively bridging them), since the results would not be pretty -- especially if there are any delays.



You can setup multiple nodes with different node numbers and register to different systems.

Take a look here for more information:

http://ohnosec.org/drupal/node/49

-Stacy

On 01/22/2016 08:03 PM, Bryan D. Boyle wrote:
Have a quick question...I've built a DIAL node on a Pi and have (with some great help from Scott KB2EAR) successufully brought it up on an LTE hotspot via wifi, and am using his hub as a proxy, successfully registering (and working) through his hub.

I'm registering to his hub, not the allstarlink registry; so this means that, for whatever reason (assuming because I don't touch the registry...but wouldn't the proxy do that?) I don't show up in the active nodes list.

If this is correct, and assuming you can't register to more than one registry (is that redundant?), is there a work around that would let me proxy my connection, but still also show me as active in the allstar database?  

Does this make sense (I'm building out a portable repeater, but want to have a full asterisk instance running rather than an RTCM solution, and the Pi, couple GM300s, URI, and mobile duplexer makes for a nice portable node.  Not to mention that if I take the Pi, URI, and hotspot sans radios, I built a speaker amp & Mic interface that plugs into the URI that gives me asterisk connectivity without the radios...in a hotel room or some such...)

Just throwing this out there...TIA.
--
Bryan
Sent from my iPhone 6S...No electrons were harmed in the sending of this message.




_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.