That's an interesting question. Obviously the USB device has a couple of outputs on
it that certainly could be accessed by the chan_usbradio and/or chan_simpleusb
modules and controlled through app_rpt. The URI was also designed with this in
mind, being that we brought all the outputs out to the connector.

In nearly 10 years that this project has been going on, you are the FIRST person to
even ask this question or show any interest in using these outputs. This is the main
reason why I never bothered to implement this functionality.

Sure, it can be done. Yeah, Ill work on this. Heck, even if you're the only person that
ever uses it, at least you can benefit from the work involved.

JIM WB6NIL

> Date: Wed, 29 Sep 2010 10:05:21 -0400
> From: n3fe@repeater.net
> To: app_rpt-users@qrvc.com
> Subject: [App_rpt-users] Maxtrac as a remote base

>
> I have been up and running now for about a month. I have added a
> maxtrac radio to use as a remote base. On my other controllers I would
> pulse a line to ground momentarily to move the channel up or down. I
> have done some reading and I haven't seen anything that talks about
> app_rpt doing this.
>
> Does asterisk/app_rpt have the ability to work with outputs? What would
> need to be done to be able to do something like this if something isn't
> already in place for it?
>
> Corey N3FE
>
>
> --
> This message was scanned and is believed to be clean.
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users@qrvc.com
> http://qrvc.com/mailman/listinfo/app_rpt-users

_______________________________________________
App_rpt-users mailing list
App_rpt-users@qrvc.com
http://qrvc.com/mailman/listinfo/app_rpt-users