I think that if you feed direct discriminator audio to the usb interface and use usbradio then it automatically takes care of the necessary delays and avoids loosing any audio in the process.  For best results you can grab the direct discriminator audio from the cable that runs from inside the Receiver Unit to the Filter Unit (shown below), I can't remember if I used the L-in or the R-in.  Or second best you can use the DSP processed discriminator output in the DB15 connector (center pin in center row, pin 8) but it isn't as good and has more delay.


​

On Tue, Jun 5, 2018 at 9:41 PM, Mike <mm@midnighteng.com> wrote:


Well, I don't want to lead you astray... as I'm not for sure on this...

Had to think on it a while...

You might try adding some time to rxondelay (ms)  but I'm not sure that will delay the repeated audio.

I think it may only delay the cor activation time.

But, if nobody chimes in with the 'right stuff' give it a try.

I'm thinkin you might need to create a special audio delay.

73,

...mike/kb8jnm


On 6/5/2018 10:10 PM, John W Benedict wrote:

Hello,

 

I have ASL running a Dell Slim Form computer all seems to be work quite well, connections, Echolink and local repeater with great audio reports however… I like to know how to eliminate the squelch crash on the tail maybe adding some milliseconds to the receiver audio?

 

The system is a Yaesu DR-1X interfaced with the URIx controller using SimpleUSB in ASL version 20180417

The computer: Dell SFF Version 4.9.0-6-amd64 #1 SMP Debian 4.9.88-1+deb9u1 (2018-05-07) x86_64.

 

I am very novice with Linux and Asterisk but learning bits and pieces…

 

Thank you

John de KE5RS
_._ . ..... ._. ...

 



_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.


_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.