Yes, you can do this. I had an AllStar-independent demonstration
repeater set up with two phones connected via a SIP ATA, and that
worked just fine.
How are you invoking the Rpt application in the extension that would
connect your SIP phone to the repeater? You have to use either the
reverse-autopatch option or one of the "phone control mode"
options... but one of those should provide an acceptable solution
for connecting a SIP or Zaptel channel to the repeater.
The doc snippet below should give you the basic idea -
************
Rannounce-string[|timeout[|timeout-destination]]
- Amateur Radio
Reverse
Autopatch. Caller is put on hold, and announcement (as
specified by the
'announce-string') is played on radio system.
Users of radio
system can access autopatch, dial specified
code, and pick up
call. Announce-string is list of names of
recordings, or
\"PARKED\" to substitute code for un-parking,
or \"NODE\" to
substitute node number.
P - Phone Control
mode. This allows a regular phone user to have
full control and
audio access to the radio system. For the
user to have DTMF
control, the 'phone_functions' parameter
must be specified
for the node in 'rpt.conf'. An additional
function (cop,6)
must be listed so that PTT control is available.
D - Dumb Phone
Control mode. This allows a regular phone user to
have full control
and audio access to the radio system. In
this mode, the
PTT is activated for the entire length of the call.
For the user to
have DTMF control (not generally recomended in
this mode), the
'dphone_functions' parameter must be specified
for the node in
'rpt.conf'. Otherwise no DTMF control will be
available to the
phone user.
************
73 de Josh KI4ITI
On 01/13/2012 05:18 AM, Ryan Collier wrote:
Greeting
Group,
I finally got my repeater back up do to hardware failure. But I am
trying to add to the system to get more control over it. So I have
setup sip softphones on my computers. They all talk to eachother
fine after my blonde moment. (hand on forehead)
So what I am trying to accomplish is to be able to use the sip
softphones on the repeater system with out having to connect to
the allstar sip network. Because the repeater will still work with
out the WAN hookup. If we loose internet and the hsmm-mesh is
hooked up I want the sip phones to still work on my internal
system. When I do connect a sip phone to the repeater channel I
get this error. We only accept links via IAX2, Echolink, IRLP or
Local!!
Is there a way I can make this work or am I beating a dead horse?
73
Ryan
KB8PMY
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users