Hi
 
I tried the following and it did stop the error massages.
 
- Disable ACPI and reboot your system. You need to edit /boot/grub/grub.conf and modify kernel parameters as follows:

kernel /vmlinuz-2.6.18-53.1.4.el5 ro root=LABEL=/ vga=0x314 acpi=off
 
However I am not sure what ACPI does for the allstar link.
 
will this have any negative impacts?
 
or does this tell anyone what the problem may be?
 
Chris

From: David Osborn <david.osborn@manx.net>
To: app_rpt-users@ohnosec.org
Sent: Monday, August 26, 2013 10:10 AM
Subject: [App_rpt-users] Asterisk ended with exit status 1

 
I claim no expert knowledge here but I was mucking around trying to get Acid running on a thin client – just for the heck of it really. Anyway, I got this error message, along with the log messages about a problem with the Zaptel Configuration, and I found a reference to this issue here: http://www.easyasterisk.org/modules/smartfaq/faq.php?faqid=1
 
Booting the thin client with ACPI disabled cured the problem with Zaptel, but then the LAN port wouldn’t come up L so I was still stymied!
 
Anyway I don’t know if this will help, but it might be worth a go.
 
David Osborn
 
GD4HOZ
 

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users