two boxes behind a common router need to have different port numbers - have you done that?

you use the "bindport" parameter in the iax config file.

in the [nodes] stanza you need to specifically mention the new port number as part of the addressing

Ken

-----Original Message-----
From: k8khw <k8khw@att.net>
To: app_rpt-users <app_rpt-users@ohnosec.org>
Sent: Thu, Sep 22, 2011 2:52 am
Subject: [App_rpt-users] dead nodes

Hi Guys

I have a couple Nodes on one box one as a hub

and the other as a regular Node, Radio ect I can log

into the box ok, It boots up fine, I can ping out of the box

ok so it is seeing the internet ok but will not take any

commands from the Asterisk CLI prompt at all. If I type

any command it simply does nothing. Any ideas on what

could be wrong

Randy

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users