On Feb 4, 2011 1:30 PM, "Tim Sawyer" <tim.sawyer@me.com> wrote:
> Yes, simpleusb is what I'm using on my nodes. What isn't working for you?
> --
> Tim
> :wq
>
> On Feb 4, 2011, at 11:25 AM, Steve Passmore wrote:
>
>> Would it make sense to use simpleusb when doing this? I've tried to use simpleusb but haven't had much luck. Is there any documentation on it?
>>
>> Thanks,
>> Steve
>>
>> On 2/4/2011 6:17, Tim Sawyer wrote:
>>>
>>> This board is for when your controller has only one port or no free ports. If you have a free port, app_rpt works perfectly fine with your existing controller. Just set duplex=0 and linktolink=yes.
>>> ---
>>> TIS
>>>
>>>
>>> On Feb 3, 2011, at 8:15 AM, Jim Duuuude wrote:
>>>
>>> Not necessarily. We have a simple board (user-buildable project) that does that very nicely.
>>> I you have a standalone repater already hooked up to a controller this board can be put
>>> in-between them and it makes it into a very nice adjunct.
>>>
>>> JIM WB6NIL
>>>
>>> Date: Thu, 3 Feb 2011 11:09:34 -0500
>>> From: kc2wdz@gmail.com
>>> To: app_rpt-users@ohnosec.org
>>> Subject: [App_rpt-users] app-rpt with external repeater controller possible?
>>>
>>> Is it possible to use a repeaters external controller and just use app-rpt for it's linking capabilities?
>>> I'm guessing there would be no way of avoiding the repeater id's and messages being sent out to any linked repeater nodes.
>>>
>>> _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users@ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>>
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users@ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users@ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>