Thanks Tim, that worked!!!
Set mine to 60 and it works.
Lee
In a message dated 9/5/2013 4:58:21 P.M. Pacific Daylight Time, tim.sawyer@me.com writes:
Look at /usr/src/astsrc/asterisk/channels/chan_echolink.c
I'm no good at C but I have a stinking suspicion that increasing EL_MAX_CALL_LIST would allow both bigger permit and deny lists :-)
Looks like I am having the same problem. Looks like the MAX stations is 30
Lee
In a message dated 5/21/2013 11:08:47 A.M. Pacific Daylight Time,
w8jtw@yahoo.com writes:
Is there anyway to increase the permit= list in echolink.conf to work with more than 25 or so stations? Once I get beyond 25 it does not want to allow beyond the first 25. Or is there a way to limit to just USA connections?
I dont want to run a wide open echolink but have many friends i don't want to block need to have capacity of about 100 or so.
Thought of trying Permit=W*,N*,A*,K* not sure if that would limit to just US callsigns or not.
Any suggestions?
Thanks
Joe
W8JTW
Node 27891
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users