I had this feature setup a few months ago and everything seemed to work ok.

I tried it today and it is no longer working.

Where can I investigate the error log files to see what may have happened ?

I use it to page a Motorola portable radio using Quick Call Paging.
887=cop,48,!2688.0/1000,!1130.5/3000  ; Send two tone paging sequence

When I enter the code to transmit the signal, there is no tones produced.

I have tried it with different radios as well as via the iaxRpt program.

Thanks for any help

Bob W2YMM

Robert Prybyzerski Jr
W2YMM
631-960-1051
http://www.w2ymm.com

Allstar 28183,29973

IRLP 4265

Echolink 1224

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.