Hi Travis,

In rpt.conf there is a section called wait-times.

Here is a copy of the section I have in my rpt.conf file:

(located in the node definition stanza near the top of rpt.conf, under the node number)
wait_times=wait-times ; Wait times

(then located between the [morse] stanza and the [node] stanza)


;
; This section allows wait times for telemetry events to be adjusted
; A section for wait times can be defined for every repeater
;

[wait-times]                                                                                                 
telemwait=500                          ; Time to wait before sending most telemetry
idwait=500                              ; Time to wait before starting ID
unkeywait=500                          ; Time to wait after unkey before sending CT's and link telemetry
calltermwait=2000                       ; Time to wait before announcing "call terminated"

Adjust the telemwait delay to suit your needs.

Cheers

Matt
G4RKY


On 1 October 2011 23:34, Travis Best <w3tmb1@gmail.com> wrote:
Is there a way to delay the messages the XIPAR server put over the air?? The problem I am having is for example if I send the *81 command to get the current time I will only hear the min's because it is not keyed up long enough before it starts talking.

Thanks
for any help
W3TMB
Travis
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users