Is there a way to mute the MDC1200?  My control codes are working but the MDC is transmitted over the TX path on all linked repeaters.  Is it possible to mute this?

Thanks,

K0JSC

---

From: Jim Duuuude [mailto:telesistant@hotmail.com]
Sent: Tuesday, September 18, 2012 10:32 AM
To: Jeffrey S. Carrier; app_rpt mailing list
Subject: RE: [App_rpt-users] Remote command?

Well, how about *4XXXX*31999#

(like if you wanted to execute *1999 on the linked node)

Jim

---

Date: Tue, 18 Sep 2012 10:14:18 -0600
From: jeff.carrier@rmsmsecurity.com
To: app_rpt-users@ohnosec.org
Subject: [App_rpt-users] Remote command?

Quick question, I’m playing with MDC1200 control due to all of the recent posts.  I have that part working but here is my issue.  I have 4 nodes, 3 of them are connected to radios and one of them is a hub node.  The hub node is connected to the internet and is the connection point to the allstar and echolink network.  The 3 nodes connected to the radios are on private wireless LAN.  I’d “like” to be able to send a command on one of the RF nodes via either MDC1200 or DTMF to say disable incoming connections but that command has to be passed to the “hub” node.  Is there a way to properly format a macro to accomplish this or am I stuck with doing *4XXXXX then sending the command?

Thanks in advance

73 de K0JSC

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users