"Got Root?"

How many software engineers does it take to change a light bulb?

None. It's a hardware problem.

Unix is user friendly. It's just very particular about who it's friends are.

WINDOWS: Will Install Needless Data On Whole System

MICROSOFT: Most Intelligent Customers Realize Our Software Only Fools Teenagers.

A ntennas
P oorly
P laced
L acks
E ngineering

The best way to accelerate a computer running Windows is at 9.81 m/s².

"I get paid to support Windows, I use Linux to get work done."

On Fri, Sep 20, 2013 at 7:21 PM, Robert A. Poff <wb3awj@comcast.net> wrote:

Try numbering your memories from 00 to 99 instead of three digits.
Mark Johnston <markjohnston73@gmail.com> wrote:
Hello everyone,

I have finally got the ic-706 remote base partially working
I can scan freq, move up in freq, and read status, Now that the commands
also the init=freq..... works when I connect so it can set the frequency.

just fine, yet if I do *1444*000*0... etc does not work
If I do *0001 for memory 001 etc, I get 'memory not found'

which the memory is in the rpt.conf

[memory]
;Syntax : CC=RRR.RRR,PPP.P,AAAAA
; C=Channel Number
; R=RX Frequency
; P=PL Frequency
; A=Attributes
;
;Attributes : a=AM b=LSB f=FM u=USB
; l=Low Power m=Medium Power h=High Power
; -=Minus TX Offset s=Simplex +=Plus TX Offset
; t=TX PL on r=RX PL on

;
004=147.700,123.0,fshrt
005=147.100,123.0,fshtt
006=003.860,100.0,bshrt
init=003.980,100.0,bshrt ;Set to this on startup

This is just above the macro section below the functions-remote...

At the end of the file I tried[memory]

[memory]
001=147.700,123.0,fshrt
002=147.100,123.0,fshtt
003=003.860,100.0,bshrt

None of these work, always says 'memory not found'

Any ideas? I know I am getting close to making this work!

0=remote,1 ; Retrieve Memory

1=remote,2

Mark KC7DMF
App_rpt-users mailing list
App_rpt-users@ohnosec.org

http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
--
Sent from my Android phone with K-9 Mail. Please excuse my brevity and typing errors.html>