I am trying to install ACID over the XIPAR install on a Compaq Evo N610C laptop.
The install process hangs at "running /sbin/loader".
I have tried a few of the remedies suggested for the same problem with other distros, but no luck.
Any ideas?
73 de W4SKI
Send App_rpt-users mailing list submissions to
app_rpt-users@ohnosec.org
To subscribe or unsubscribe via the World Wide Web, visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
or, via email, send a message with subject or body 'help' to
app_rpt-users-request@ohnosec.org
You can reach the person managing the list at
app_rpt-users-owner@ohnosec.org
When replying, please edit your Subject line so it is more specific
than "Re: Contents of App_rpt-users digest..."
Today's Topics:
1. Lost conn to RTCM (Fran)
2. RTCM for Sale (Jim W7RY)
3. Re: RTCM for Sale (Jim W7RY)
4. Node Freezing (Steve Schulze)
----------------------------------------------------------------------
Message: 1
Date: Wed, 14 Nov 2012 17:46:47 -0800 (PST)
From: Fran <baldwin88@yahoo.com>
To: "App_rpt-users@ohnosec.org" <App_rpt-users@ohnosec.org>
Subject: [App_rpt-users] Lost conn to RTCM
Message-ID:
<1352944007.82204.YahooMailNeo@web120302.mail.ne1.yahoo.com>
Content-Type: text/plain; charset="iso-8859-1"
I lost connection to my 2 remote RTCM units....Recently my router was rebooted by accident and it went back to all default settings, my IP changed. I reloaded all the port forwarding info but still cant connect to my 2 remote RTCM units.
?
I checked the RTCM settings and the only thing I can think of is that the Voter Server Address was hard coded with my Old IP, however reading the RTCM manual it states the following:?
The RTCM does a DNS resolution once per minute and resolves the IP address
for the RTCM server, based upon the FQDN specified in this configuration. Therefore, the actual IP address of the RTCM server may be changed (and its associated DNS entry), and the RTCM
firmware will continue to be aware of its current IP address (thus not requiring re-configuration of the RTCM firmware if the IP address of the RTCM server changes).
?
?
So even if my IP on my router changed shouldnt it be transparent to the RTCM?????
?
Frank
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20121114/c64d55af/attachment-0001.html>
------------------------------
Message: 2
Date: Wed, 14 Nov 2012 21:13:37 -0800
From: "Jim W7RY" <w7ry@centurytel.net>
To: <app_rpt-users@ohnosec.org>
Subject: [App_rpt-users] RTCM for Sale
Message-ID: <B5A9946EFD884A61B40C2E30D4496604@JimsLaptop>
Content-Type: text/plain; charset="iso-8859-1"
I have a new in the box, never hooked up or used RTCM.
$250.00 shipped. PayPal accepted.
Thanks
73
Jim W7RY
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20121114/aba664a2/attachment-0001.html>
------------------------------
Message: 3
Date: Wed, 14 Nov 2012 22:06:38 -0800
From: "Jim W7RY" <w7ry@centurytel.net>
To: <app_rpt-users@ohnosec.org>
Subject: Re: [App_rpt-users] RTCM for Sale
Message-ID: <2479A4F0FE214E7D983324B664E177E6@JimsLaptop>
Content-Type: text/plain; charset="iso-8859-1"
The RTCM is sold.
Thanks!
73
Jim W7RY
From: Jim W7RY
Sent: Wednesday, November 14, 2012 9:13 PM
To: app_rpt-users@ohnosec.org
Subject: [App_rpt-users] RTCM for Sale
I have a new in the box, never hooked up or used RTCM.
$250.00 shipped. PayPal accepted.
Thanks
73
Jim W7RY
--------------------------------------------------------------------------------
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20121114/9ec49fc6/attachment-0001.html>
------------------------------
Message: 4
Date: Thu, 15 Nov 2012 07:27:42 -0600
From: Steve Schulze <n9udo@yellowthunder.org>
To: "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org>
Subject: [App_rpt-users] Node Freezing
Message-ID: <50A4EDCE.6000201@yellowthunder.org>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
I had recently moved node 27727 to a new box using the latest full
install of ACID.
I'm now seeing random freezing of Asterisk, or one of it's components,
as the node just stops responding. Sometime the node will run for
several hours, longest run was almost 12 hours, I have seen it as short
as 1 or 2 hours. When this occurs, I cannot reboot the machine from the
prompt. When I attempt, the PC speaker just squeals until I force the
power off.
Below is a capture of what usually occurs when the node freezes.
[KWB9FDZ*CLI>
[Nov 14 17:31:03] ERROR[2364]: chan_usbradio.c:2599 usbradio_read: HID
process has died or something!!
[KWB9FDZ*CLI>
-- Hungup 'Zap/pseudo-1321073272'
-- Hungup 'Zap/pseudo-1923931712'
-- Hungup 'Zap/pseudo-471354119'
-- Hungup 'Zap/pseudo-1974549115'
-- Hungup 'Zap/pseudo-938459000'
-- Hungup 'Zap/pseudo-360012123'
[Nov 14 17:33:08] WARNING[2361]: app_rpt.c:21836 rpt_master:
rpt_thread restarted on node 27727
[KWB9FDZ*CLI>
-- Re-Loading config for repeater 27727
[KWB9FDZ*CLI>
-- rpt (Rx) initiating call to Radio/usb27727 on Radio/usb27727
[KWB9FDZ*CLI>
[Nov 14 17:33:12] ERROR[5383]: chan_usbradio.c:2599 usbradio_read: HID
process has died or something!!
[KWB9FDZ*CLI>
-- Hungup 'Zap/pseudo-1356185696'
-- Hungup 'Zap/pseudo-1200975276'
-- Hungup 'Zap/pseudo-1694965886'
-- Hungup 'Zap/pseudo-1185873296'
-- Hungup 'Zap/pseudo-353324112'
-- Hungup 'Zap/pseudo-956752671'
== Set device 4-1 to usb27727
[Nov 14 17:33:40] WARNING[5384]: chan_usbradio.c:1700 hidthread: Loaded
parameters from usbradio_tune_usb27727.conf for device usb27727 .
[KWB9FDZ*CLI>
[Nov 14 17:35:49] WARNING[2361]: app_rpt.c:21836 rpt_master: rpt_thread
restarted on node 27727
-- Re-Loading config for repeater 27727
-- rpt (Rx) initiating call to Radio/usb27727 on Radio/usb27727
[Nov 14 17:35:49] WARNING[5399]: chan_usbradio.c:2674 usbradio_read:
Possibly stuck USB read channel. [usb27727]
[Nov 14 17:35:53] ERROR[5399]: chan_usbradio.c:2599 usbradio_read:
HID process has died or something!!
[KWB9FDZ*CLI>
-- Hungup 'Zap/pseudo-1234779841'
-- Hungup 'Zap/pseudo-823024661'
-- Hungup 'Zap/pseudo-128844783'
-- Hungup 'Zap/pseudo-1477433026'
-- Hungup 'Zap/pseudo-47743459'
== Set device 4-1 to usb27727
[Nov 14 17:36:22] WARNING[5400]: chan_usbradio.c:1700 hidthread: Loaded
parameters from usbradio_tune_usb27727.conf for device usb27727 .
-- Hungup 'Zap/pseudo-358092408'
[Nov 14 17:37:59] WARNING[2361]: app_rpt.c:21836 rpt_master:
rpt_thread restarted on node 27727
-- Re-Loading config for repeater 27727
-- rpt (Rx) initiating call to Radio/usb27727 on Radio/usb27727
[Nov 14 17:38:03] ERROR[5415]: chan_usbradio.c:2599 usbradio_read:
HID process has died or something!!
[KWB9FDZ*CLI>
-- Hungup 'Zap/pseudo-959192474'
-- Hungup 'Zap/pseudo-119995292'
-- Hungup 'Zap/pseudo-910823610'
-- Hungup 'Zap/pseudo-1271419211'
-- Hungup 'Zap/pseudo-1514445782'
-- Hungup 'Zap/pseudo-1885015791'
== Set device 4-1 to usb27727
[Nov 14 17:38:31] WARNING[5416]: chan_usbradio.c:1700 hidthread:
Loaded parameters from usbradio_tune_usb27727.conf for device usb27727 .
[KWB9FDZ*CLI>
[Nov 14 17:40:08] WARNING[2361]: app_rpt.c:21836 rpt_master: rpt_thread
restarted on node 27727
[KWB9FDZ*CLI>
-- Re-Loading config for repeater 27727
[KWB9FDZ*CLI>
-- rpt (Rx) initiating call to Radio/usb27727 on Radio/usb27727
[KWB9FDZ*CLI>
[Nov 14 17:40:12] ERROR[5431]: chan_usbradio.c:2599 usbradio_read: HID
process has died or something!!
[KWB9FDZ*CLI>
-- Hungup 'Zap/pseudo-123945640'
-- Hungup 'Zap/pseudo-1914243603'
-- Hungup 'Zap/pseudo-1904931772'
-- Hungup 'Zap/pseudo-1252634755'
-- Hungup 'Zap/pseudo-1804246462'
-- Hungup 'Zap/pseudo-569032085'
== Set device 4-1 to usb27727
[Nov 14 17:40:40] WARNING[5432]: chan_usbradio.c:1700 hidthread: Loaded
parameters from usbradio_tune_usb27727.conf for device usb27727 .
[KWB9FDZ*CLI>
[Nov 14 17:42:17] WARNING[2361]: app_rpt.c:21836 rpt_master: rpt_thread
restarted on node 27727
[KWB9FDZ*CLI>
-- Re-Loading config for repeater 27727
[KWB9FDZ*CLI>
-- rpt (Rx) initiating call to Radio/usb27727 on Radio/usb27727
[KWB9FDZ*CLI>
[Nov 14 17:42:21] ERROR[5456]: chan_usbradio.c:2599 usbradio_read: HID
process has died or something!!
[KWB9FDZ*CLI>
-- Hungup 'Zap/pseudo-1625376915'
-- Hungup 'Zap/pseudo-1332043632'
-- Hungup 'Zap/pseudo-1082279744'
-- Hungup 'Zap/pseudo-1304564785'
-- Hungup 'Zap/pseudo-976351035'
-- Hungup 'Zap/pseudo-2003986033'
== Set device 4-1 to usb27727
[Nov 14 17:42:49] WARNING[5457]: chan_usbradio.c:1700 hidthread: Loaded
parameters from usbradio_tune_usb27727.conf for device usb27727 .
[KWB9FDZ*CLI>
[Nov 14 17:44:26] WARNING[2361]: app_rpt.c:21836 rpt_master: rpt_thread
restarted on node 27727
[KWB9FDZ*CLI>
-- Re-Loading config for repeater 27727
[KWB9FDZ*CLI>
-- rpt (Rx) initiating call to Radio/usb27727 on Radio/usb27727
[KWB9FDZ*CLI>
[Nov 14 17:44:30] ERROR[5481]: chan_usbradio.c:2599 usbradio_read: HID
process has died or something!!
[KWB9FDZ*CLI>
-- Hungup 'Zap/pseudo-562695817'
-- Hungup 'Zap/pseudo-41485895'
-- Hungup 'Zap/pseudo-674125634'
-- Hungup 'Zap/pseudo-1681055800'
-- Hungup 'Zap/pseudo-1172360100'
-- Hungup 'Zap/pseudo-2074122207'
== Set device 4-1 to usb27727
[Nov 14 17:44:59] WARNING[5483]: chan_usbradio.c:1700 hidthread: Loaded
parameters from usbradio_tune_usb27727.conf for device usb27727 .
[KWB9FDZ*CLI>
[Nov 14 17:46:36] WARNING[2361]: app_rpt.c:21836 rpt_master: rpt_thread
restarted on node 27727
[KWB9FDZ*CLI>
-- Re-Loading config for repeater 27727
[KWB9FDZ*CLI>
-- rpt (Rx) initiating call to Radio/usb27727 on Radio/usb27727
[KWB9FDZ*CLI>
[Nov 14 17:46:40] ERROR[5506]: chan_usbradio.c:2599 usbradio_read: HID
process has died or something!!
[KWB9FDZ*CLI>
-- Hungup 'Zap/pseudo-81739412'
-- Hungup 'Zap/pseudo-933811143'
-- Hungup 'Zap/pseudo-1900592699'
-- Hungup 'Zap/pseudo-873450041'
-- Hungup 'Zap/pseudo-1455015117'
-- Hungup 'Zap/pseudo-1502090246'
== Set device 4-1 to usb27727
[Nov 14 17:47:07] WARNING[5507]: chan_usbradio.c:1700 hidthread: Loaded
parameters from usbradio_tune_usb27727.conf for device usb27727 .
The system just keep spewing this string every couple of minutes.
Anybody run across this or have any thoughts what might be causing it.
Thank you for your time.
--
Amateur Radio - The Original Social Media
Steve Schulze - Radio Amateur, General Class - N9UDO
Administrator, Baraboo, Wisconsin D-Star System - WB9FDZ
Administrator, Baraboo, Wisconsin AllStarLink Systems - 27616, 27727
Treasurer, Badgerland Amateur Television Society - KB9SFS
http://yellowthunder.org/dstar.html
------------------------------
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
End of App_rpt-users Digest, Vol 45, Issue 23
*********************************************