No need to re-thing this Kirk. It would work fine for a simple node.
Now if you wanted to monitor the Win System with 100% duty cycle, you may have a
point. But that is not the intent of my posting.
i
dont mean to be disrespectful...but WHY would you use a POOR PERFORMING UV-5R
when for less than $50 you could use a Maxtrac or Radius mobile?????
RCVR performance is dismal at best with poor image rejection,lousy dynamic
range and the selectivity of a barn door?
The first time it stays keyed for 10 minutes you will be the proud owner of
a colorful chinese blob of smoldering plastic....
Seriously...rethink this???
Kirk (WB6EGR)
On Mon, Feb 11, 2013 at 7:29 PM, Jim W7RY
<w7ry@centurytel.net> wrote:
There is COR voltage along with some transistors that control the
TDA-2822 audio chip. There is also a discrete volume control too. So you can
get fixed de-emphasised RX audio to drive a URI. So it looks like the UV5r
would be a good candidate for a node radio and long as you use the internal PL
decoder which would be fine.
73
Jim W7RY
_______________________________________________
App_rpt-users
mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users