I run a HP Neoware CA22 box, 1GHZ CPU, 1GB ram, 4GB Compact Flash card, runs fine for me with 2 nodes, 1 repeater and 1 remote base.

On Tue, Feb 14, 2012 at 11:46 AM, Bryan D. Boyle <bdboyle@bdboyle.com> wrote:
On 2/14/12 2:27 PM, Sal P. De Franco wrote:
Hello,

I have my allstar # now.

Welcome


I picked up a used computer.
Question:
How much memory is needed ?

I'm running with a gig.  Never hit swap.  Total system and apps are taking up 685 meg, rest is free.  Swap set for 2 gig, not using any of it.  Once it's loaded, it's pretty much resident and unless you're doing a lot of other things...won't change much from day to day.

And that's for a 64 bit dual core Althon cpu/CentOS to match


How big a hard drive is needed ?

Here's my specs:
disk  used  free   % use

287G  3.1G  270G   2% /

plus 100 meg for the /boot partition.

So...I'm thinking you can get away with a pretty minimal disk.  But, considering that spindles are so cheap...even for 7200rpm drives...

Doesn't take much (well, not running a gui, either...and a LOT less than Window$).  That's for a system supporting 5 hardware interfaces and a hub.

One suggestion would be to pick up a USB card that will fit into a bus slot on the motherboard.  On-board USB ports have a bad habit of not passing data fast enough...leading to choppy audio.  The 4-port cards are, IIRC, about 40. at the local big box.

This is my rig here...others will chime in, I'm sure...

--
Bryan
In this world, you must be oh so smart or oh so pleasant.
Well, for years I was smart. I recommend pleasant.
You may quote me.

Sent from my MacBook Pro.

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users



--
Jeff Ackerman
kg6uyz@gmail.com
www.cbdx.net