Hey Tim,

I tried this using CLI to ensure it was not a DTMF issue etc.  Same issue.

Odd thing is that it is working now.. This happens from time to time for no reason and if I reboot the box it starts to work again most of the time..

At the moment it is working fine. Next time it happens, I will do some more digging.

Thanks again!

Lu

KA4EPS

From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Tim Sawyer
Sent: Monday, October 31, 2011 8:54 PM
To: app_rpt list
Subject: Re: [App_rpt-users] ilink 4 issue

I assume that you can connect to the remote node ok before attempting to control it. 

Ssh in to your node and start the asterisk console, ie do "asterisk -rvvv". Then press your touch tones. You should see the correct tones on the asterisk  console.

If that looks ok, you might check and see if you're still connected. Do a "rpt lstats node#". 

--
Tim
:wq

On Oct 31, 2011, at 4:48 PM, Lu Vencl wrote:

Nothing at all.  

Sent from my iPhone, Lu Vencl

On Oct 31, 2011, at 6:17 PM, Tim Sawyer <tim.sawyer@me.com> wrote:

So what happens when you do *4 + the remote node number?

--
Tim
:wq

On Oct 30, 2011, at 3:54 PM, Lu Vencl wrote:

Been having an issue over the past several days where I can no longer execute ILINK4 to remotely control some of my other nodes.

If I reboot the node, it most of the time will correct the issue.

The other odd notable is that the CW tone frequency seems to go back to the default frequency as well.

Any thoughts on what might be happening?

Thanks

Lu

KA4EPS

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users