Does anyone know the correct settings for the RTCM in a voting configuration?

Menus

8 - GPS Data Protocol (0=NMEA, 1=TSIP) (0)

9 - GPS Serial Polarity (0=Non-Inverted, 1=Inverted) (0)

10 - GPS PPS Polarity (0=Non-Inverted, 1=Inverted, 2=NONE) (0)

I believe 8 is correct I know the baud rate is 4800 tested it on the garmin software -

not sure about the serial polarity/PPS polarity - I believe it is hooked up correctly -

the time shows not set on the RTCM, and I lose connection to the allstar/asterisk box -

once I set PPS polarity to 2 then it reconnects - this is setup as the master site for now -

Right now they are both on the same LAN -

If anyone has any other example configs for voter.conf, etc that would be great too, make sure there isn't some other setting for it.

73s

Mark