Here's our node stanza....

[1001]

rxchannel = Simpleusb/usb ; Rx audio/signalling channel
remote = xcat
civaddr = 32
functions = functions-remote
lconn = PP3=1
ldisc = PP3=0
memory = memory ; Section to hold memory entries (optional)
; remote=ft897 for Yaesu FT-897 or
; remote=rbi for Doug Hall RBI1
; remote=kenwood for Kenwood mobiles such as the TMG707A
; remote=ic706 for the Icom IC-706
ioport = /dev/ttyS0 ; Specify port for serial port (optional)
iospeed = 19200
dusbabek = yes

;iobase = 0x378 ; Specify IO port for parallel port (optional)
authlevel = 2 ; Remote base authentication level
;; authlevel = 0 : Anyone can use it
;; authlevel = 1 : Requires log in, Waits for Tx key to ask for it
;; authlevel = 2 : Requires log in, asks for it automously
;mars = 0 ; set=1 for IC-706 w/MARS mods (optional)

remote_inact_timeout=1800 ; Inactivity timer for remote base nodes only (set to 0 to disable).
remote_timeout=5400 ; Session time out for remote base. (set to 0 to disable)
;remote_timeout=120 ; Session time out for remote base. (set to 0 to disable)
;remote_timeout_warning=30

--
Tim
:wq

On Sep 20, 2012, at 12:46 AM, Matt Roberts <n9gmr@me.com> wrote:

Add "R"to the end of the memory channel definition.

Matt Roberts
n9gmr@me.com

Sent from my iPhone

On Sep 19, 2012, at 10:55 PM, Tim Sawyer <tim.sawyer@me.com> wrote:

How is a remote base memory channel programed with P/L decode? For example with this memory:
[memory]
09 = 146.895,136.5,l-t
--
Tim
:wq

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users